Laboratory Chamber

Product Details:

CERTIFICATIONSOUR CHAMBERS ARE “CE” Certified Chambers . We as company is ISO 9001:2008 Certified Company.DESCRIPTIONHLTS (High Low temp Thermal Shock ) Chamber is environmental simulation chamber designed and developed by Hamco for Rapid temperature change test and Thermal shock test. It is basically two test chambers one at High temperature and One at Low temperature and Product is placed in one basket which can be shuttled pneumatically from upper to lower and lower to upper chamber for rapid change of temperature. It is operated by HMI PLC 7” for all safety and accurate testing.FEATURESConsist of Chamber (Hamco 49 series) + Ethernet Communication card + HMI (PLC 7”) + SOFTW-21 (Web based Software Part 11 21 CFR ) +DS (Door Access System) + SAFETY-1RANGE/ TEMPERATURE/ACCURACY / UNIFORMITYUpper chamber :-Temperature Range -20°C/ -40°C /-70°C to Ambient , Temperature Accuracy +/- 1°C , Temperature Uniformity : +/- 2°C .Upper chamber :-Temperature Range Ambient to +150°C , Temperature Accuracy +/- 1°C , Temperature Uniformity : +/- 2°C .RAMP RATE•This chamber has No Ramp Up Time facility.•Usually the ramp will be in the range of 0.3 to 0.7 Deg C/ Minute.•Here Optimum Heat load considered.Hamco Suggest "The buyer is required to provide the heat load specifications prior to placing the order to ensure accurate system design and performance."CONSTRUCTION GMP MODELDouble walled , gap between walls filled with PUF Insulation. Inner Body made of SS 304 Mirror Finished, Outside SS 304 Matt Finished. Double door : Inner full Viewing door and outer door insulated with lock and key arrangement. 50mm Validation Port with silicon rubber seal to insert sensor for validation purpose. 3” Thick CFC Free Puff Insulation. Stainless steel Trays. Adjustable Tray Height adjustment. Unit Mounted on castor wheels with front lock arrangement. Stainless steel Rod Trays. Adjustable Tray Height adjustment.LIGHTINGFloroscent Light are provided , which automatically On when we open the door.CHAMBER PRINCIPLEAir circulation by Circulation Motor & Fan will continuously sucks the air from the chamber and Passes it through Air heater, Evaporator and through it back to chamber and same air will be recirculated to achieve desired Temperature stability inside chamber. Our design reduces the power consumption by 50% .ICH GUIDELINESFully Suitable to carry out Stability Studies For Conditions Such As :Upper Chamber :-•-20°C•-40°C•-70°C•-10°CLower Chamber :-•100°C•150°CAny Temperature within Range of Temperature.•Other Than this cycle Please Mention it before order.PROGRAMMABLE FEATURES•This is Multi set point programmable chamber where you can program chamber based on different temperature,its basket shuffle time, soak time and particular out put on/off during the step.•We have 5 program we can make in this chamber.•Each program can have 32 steps in it.•Each program we can repeat 999 times.Hamco suggest "Kindly provide the detailed programmable cycle specifications prior to order to ensure proper configuration and testing of the heating and cooling chamber."APPLICATIONSApplication includes Electronics & Semiconductor, Aerospace, Pharmaceuticals , Automobile, Packing Medical Storage & R&D activity.HEATING & COOLING SYSTEM•Heating system: U shaped Nichrome wire heater in SS Sheathing.•Hermetically sealed CFC free Emerson compressor with R 134a refrigerant for Positive Cycle .•Cascade Cooling system : Hermetically sealed CFC free Emerson compressor with R 404 refrigerant for Negative Cycle a cascade compressor andHermetically sealed CFC free Emerson compressor with R 23 refrigerant as Main compressor.•Three compressor Only.•Bypass solenoid valve for High temp application.•Air circulation : Flange Motor with Impeller and blower.Interior Illumination for working Area