Laboratory Instrument

Product Details:

We are engaged in offering a wide range of   Absolute Kinematic Viscosity Bath to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Kinematic Viscosity Bath' to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Laboratory Vacuum Drying Oven to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of  Environmental Cum Humidity Test Chamber to our clients. Our range of all products is widely appreciated by our clients

Product Details:

Test Method: - Flash Point is lowest temperature at which application of the ignition source causes the vapor of a specimen of the sample to ignite under the specified condition of the test.The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions.Standard: - Conforms to the specifications of ASTM D92; IP 36; ISO 2592Features & Benefits: -1) Temp Range: 79 to 400° Deg. C.2) Test Method: ISO 2592, ASTM D 92, IP 36, IS 1448 (P-69).3) Ignition Source: Gas Flame with two Pilot electric Coils.4) Temperature Sensor: PT-100 in stainless steel sheath.5) Flash/Fire Detector: Manual / Visual flash detection.
6) Controller: Current regulators which limit the current flowing to the heater, thus give us very accurate control and long life to heater.7) Flame-Sampling Arrangement: 10 Rpm, D.C. 12 v or 24V DC, gear motor, vertical movement reciprocating to & fro motion.8) Heater: 800 W, 230v.9) Electrical ignition for pilot flame-sampling. Ignition transformer having continuous o/p of 10.6 Kv. D.C. from 230 v A.C. i/p.10) Equipment Overall Size (LxWxH): 280mm (W) X 530mm ( D ) X 415 mm ( H )11) Equipment Gross Weight: 22 Kg.12) Equipment supply will be 230 V Ac , 50 Hz with 15 amp capacity.Accessories Will Be Supplied With Equipment: -1) COC CUP -- 1 NO (CAT NO HAMCO19AC1)2) SIGNAL CABLE - 1 NO. ( CAT NO HAMCO 19AC6)Spares Required For 5 Year Trouble Free Operation: -1) CERAMIC HEATER -- 2 NOS.(CAT NO HAMCO19S1)2) THERMAL INSULATOR -- 1 NO.(CAT NO HAMCO19S2)3) COC CUP -- 2 NO.(CAT NO HAMCO19AC1)4) SIDE IGNITOR WITH COIL – 3 NO EACH (CAT NO HAMCO19S3)5) COOLING FAN – 1 NO.(CAT NO HAMCO19S4)
Ordering Information: -Catalogue No Product Description Electrical RequirementHamco 19cSemi-Automatic Flash & Fire Point220-240v, 50/60hzApparatusHamco 19c Exp.Semi-Automatic Flash Point115v, 50/60hzApparatusHamco 19s1Ceramic HeaterHamco 19s2Thermal InsulatorHamco 19ac1COC CupHamco 19s3Side Igniter With CoilHamco 19s4Cooling Fan

Additional Information:

• Item Code: HAMCO19C
• Production Capacity: 500 pc/year
• Delivery Time: READY STOCK
• Packaging Details: Equipment Overall Size (LxWxH): 280mm (W) X 530mm ( D ) X 415 mm ( H ) Equipment Gross Weight: 22 Kg. Equipment supply will be 230 V Ac , 50 Hz with 15 amp capacity. 240V, 50/60Hz, Single Phase, 10.9A OR 115V, 50/60Hz, Single Phase, 20.8A 11”x22”x17” (28x53x41) Net Weight: 49 lbs (22kg) Shipping Weight: 78 lbs (35kg) Dimensions: 4.7 Cu. ft.

Product Details:

1. OUR AUTOCLAVES ARE “CE” Certified Chambers . We as company is ISO 9001:2008 Certified Company. 
2. Temperature Range ambient to 125°C Or 134°C , Temperature Accuracy +/- 0.5°C , Temperature Uniformity : +/- 1°C. 
3. Single Lever Lid Locking. 
4. The Basket will be Perforated SS Wire Mesh Baket to carry the load and to Mount the sample. 2 Nos.
5. Wheels at the Bottom for Easy Movability.
6. Heating system: U shaped Nichrome wire heater in SS Sheathing.
8. Water Filling system : Automatic Water Filling system.
9. Air Purging system : At the Preset temperature, the solenoid Valve off and At the end of cycle , it removes steam automatically.
11. Drain System : Manual Drain with Valve.
13. Fully Suitable to carry out Stability Studies For Conditions Such As :  121.3°C / 15-20 Mins / 1034 mBar (15 PSI)  OR  121.3°C / 60 Mins / 1034 mBar ( 15 PSI). This is most running Cycles. Still Any temperature , Time & Pressure Range is settable.
14. IN-Built Thermal Printer to Print the data.
15. SCN-4 . 4 Pt 100 sensor placed at different location in autoclave to auto validate the chamber. It also work as standby sensor as main sensor fails it switch to stand by sensor.
16. DQ,IQ,OQ,PQ Full set of Validation protocol along with autoclave.
18. The controlling system is Fully PLC Based , It consist of HMI Display , PLC Digital & Analoguecards, Relays, Contactors, Overload Trip devices, MCB.Separate Connection for Main & UPS ( UPS will be on Buyer Scope). This helps in recording the chamber conditions even during Power fail and capture the event of Power Fail & Resume during the conditions. The control panel has below features. *  IP 22 Protection. Data Storage of 10,000 Readings. If we set data interval of 30 Mins , it can saveapprox. one year data. Controls Temp ,Time & Pressure using PID Loops. Captures all the events Like Power OFF / Resume , Water Level Low/OK , Cyclestart/stop , Thermostate High/Low , etc. Operates as Safety Controller by cutting of Heating device on Over temperature , and generates Alarms and transmit the same alarm to Multiple locations. RS 485 Communication Port for PC Connectivity.
20. SAFETY :-Temperature Safety :- When Temperature deviates higher side than their prescribed limits , the Heater willbe cut off by switchgears & if still go higher than by Thermostate. It generated alarm and horn the buzzer if it deviates. Once it reach within the range , the heating system reset automatically. Water Level Safety :- Low water level safety , In case of Insufficient water in autoclave tank , the Heater is Cut off and it generates the alarm and horn the buzzer . When it resumes, it starts automatically. Human Safety :- All the component has individual MCB for Overload and trip protection. The system has provided with proper earthing. If Lid Opens , Full System will be Shut Off. Sensor Safety :- The system has been provided with Stand by Sensor, So in case Master sensor Fails, itswitch over to Safety sensor thus reduces the down time possibility.

Additional Information:

• Item Code: 90278020
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Card Board Box

Product Details:

We are engaged in offering a wide range of  Ultra Low Temperature Deep Freezer to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Temperature Test Chamber to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Oxygen Bomb Calorimeter' to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Ultra Low Temperature Deep Freezer 80c to our clients. Our range of all products is widely appreciated by our clients

Product Details:

* Fully Automatic Bomb Calorimeter
* With Inbuilt Touchscreen Color display with PLC
* Single Unit Don't Require any assembly.
* With Auto oxygen Filling Unit.
* Isothermal Method
* Highly Accurate with 1% RSD.
* 1000 Sample consumable free with Equipment.
* 1000 data storage Memory with software.
* Inbuilt Printer.
* Standard sample with Benzoic acid 100 tablet.
* Dont require to form tablet as it can burn the sample without forming tablet.
* Hamco Also have High end ISOPERIBOL Model HAMCO 6F with 0.1-0.3% RSD. 

Product Details:

Digital Bomb Calorimeter Description:
A digital bomb calorimeter is a sophisticated analytical instrument used to measure the calorific value or heat of combustion of solid and liquid fuels, organic materials, food products, and other combustible substances. This instrument provides accurate and reliable data by quantifying the heat released during a controlled combustion process within an oxygen-rich environment, enabling researchers, scientists, and engineers to evaluate the energy content, efficiency, and quality of various materials based on their combustion characteristics.
Key Components:

Bomb Vessel: Constructed of high-quality materials such as stainless steel or titanium, the bomb vessel is a robust, pressure-resistant container designed to withstand high temperatures and pressures during combustion experiments. It houses the sample, oxygen, and ignition system, ensuring safety, reliability, and accurate heat measurement.

Ignition System: Incorporates an electric ignition system or a nichrome wire fuse to initiate the combustion reaction, facilitating consistent and uniform ignition of the sample within the bomb vessel.

Water Jacket: Surrounding the bomb vessel, a water jacket maintains a constant temperature during the calorimetric process, ensuring adiabatic conditions and accurate heat transfer measurements by absorbing the heat released during combustion.

Stirring System: Features a motorized stirring system with variable speed control to ensure homogeneity, facilitate rapid heat distribution, and prevent temperature gradients within the calorimeter during the experiment.

Temperature Measurement: Utilizes advanced digital thermometers, platinum resistance thermometers (PRTs), or thermocouples to monitor and record temperature changes within the calorimeter with high precision and resolution.

Pressure Measurement: Incorporates pressure transducers, gauges, or sensors to measure the internal pressure within the bomb vessel during combustion, providing critical data for calculating the calorific value and evaluating combustion efficiency.

Digital Control & Data Acquisition:

Control Unit: Equipped with a microprocessor-based control unit featuring a user-friendly interface, touchscreen display, and intuitive software for easy operation, real-time monitoring, and automation of calorimetric experiments.

Data Logging: Enables digital data logging, storage, and retrieval of experimental parameters, temperature profiles, pressure readings, and calorific values, facilitating data analysis, interpretation, and reporting for scientific research, quality control, and regulatory compliance.

Calorimetric Calculations: Performs complex calorimetric calculations, including heat of combustion, calorific value, energy content, and efficiency calculations based on standardized equations, algorithms, and empirical correlations tailored to specific applications and sample types.

Safety Features:

Safety Interlocks: Incorporates multiple safety interlocks, pressure relief valves, and emergency shutdown mechanisms to ensure operator safety, prevent overpressure situations, and mitigate risks associated with combustion experiments.

Compliance & Certification: Designed, manufactured, and certified in accordance with international standards, such as ASTM, ISO, and DIN, ensuring compliance with regulatory requirements, calibration protocols, and quality assurance procedures for accurate and reliable calorimetric measurements.

Additional Information:

• Production Capacity: 500 PC/ANNUM
• Delivery Time: READY STOCK
• Packaging Details: CARDBOARD

Product Details:

We are engaged in offering a wide range of   Laboratory Vacuum Oven With Pump to our clients. Our range of all products is widely appreciated by our clients

Product Details:

HAMCO” ‘HEATING AND COOLING CHAMBER WITH HUMIDITY CONTROL’ is designed primarily to meet therequirements for tests of thermal shock and various industrial applications. These chambers are designed to meetthe testing challenge of vary industrial application.HAMCO Make GMP ‘HEATING AND COOLING CHAMBER WITH HUMIDITY CONTROL’ is especially built to Pass FDAand ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICHguidelines for long term, intermediate and accelerated stability studies.Specifications:- Temperature Range -40 °C to 250.0 °C, Humidity 40 to 95%RH, Accuracy +/- 0.5 °C. Uniformity +/- 2.0 °C Temperature Range -20 °C to +175.0 °C, Humidity 40 to 95% RH, Accuracy +/- 0.5 °C. Uniformity +/- 2.0 °C Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 deg C Heating system: U shaped Nichrome wire heater in SS Sheathing. Cooling system: Hermetically sealed CFC free Emerson compressor with R 23a refrigerant .Cascade system. Air circulation: Flange Motor with Impeller and blower. Interior Illumination for working Area. There will be two nos of blower from 450 Ltr Onwards. Double walled, gap between walls filled with PUF Insulation. Standard Model: Stainless steel Mirror polished chamber and heavy gauge Powder- coated CRC exterior. GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel. Double Door: Inner full Viewing door and outer door insulated with lock and key arrangement. 50mm Validation Port with silicone rubber seal to insert sensor for validation purpose. 3” Thick CFC Free Puff Insulation. Stainless steel Trays. Adjustable Tray Height adjustment. Unit Mounted on castor wheels with front lock arrangement.Control Panel:- Microprocessor based PID temp. Controller with auto tune facility for precise control of temperature. Temp. Sensor: PT- 100. Dedicated safety controller with separate sensor to cut off the supply in case of overshoot and undershootof temperature giving audio visual alarm. ( Optional) Recorder data bank to store and print set values , process values , date and time of master controllers withvariable print time intervals ( Optional) Alarm: Audio visual alarm if temperature deviates from the preset temperature. PC Interface communication card with RS 485 for temperature and humidity control system ( Hardwareonly) ( optional)Safety Features:- Over heat temperature with alarm. Electrical overload compressor cut off. Time delay for compressor switch on. Electrical short circuit breaker.Utilities (Pre Installation Requisite):- Room temperature around machine preferably at 25 degree C. Stabilised input voltage of 230V Ac, 50 Hz, and 20 Amps. Water drains line with ½” Nozzle to be provided at floor level.Data Record:- 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded) Multilevel Passwords. Data storage device has online and offline capabilities. Multi chamber data acquisition on single software. Tabular and graphical report, alarm deviation report. Mean Kinetic temperature report and alarm deviation report. Audit trial report. Attractive reports and graphs. Alarm report. Time synchronisation.

Additional Information:

• Item Code: HAMCO46
• Delivery Time: READY STOCK
• Packaging Details: Chamber 45x45x45 Over All 60x95x110 Unit 110 Packed in wooden case 165

Product Details:

An ultra-low temperature deep freezer, often referred to simply as an ultra-low freezer, is a specialized refrigeration unit designed to maintain extremely low temperatures, typically ranging from -40°C to as low as -86°C or even lower, depending on the specific model and application requirements. These freezers are used primarily in scientific, medical, and research laboratories to store temperature-sensitive materials such as biological samples, vaccines, enzymes, reagents, and other valuable specimens.Key Features and Characteristics of Ultra-Low Temperature Deep Freezers:Temperature Range: Ultra-low freezers are capable of maintaining temperatures significantly below freezing, providing a stable and uniform cold environment for long-term storage of sensitive materials. The temperature range varies depending on the model but commonly ranges from -40°C to -86°C or lower.Insulation and Construction: These freezers are constructed with high-quality insulation materials, such as polyurethane foam or vacuum-insulated panels, to minimize heat transfer and maintain consistent temperature levels. The exterior and interior surfaces are typically made of corrosion-resistant materials like stainless steel for durability and ease of cleaning.Refrigeration System: Ultra-low freezers utilize advanced refrigeration systems, including compressors, evaporators, condensers, and refrigerants optimized for low-temperature applications. The systems are designed for efficient cooling performance, rapid temperature recovery after door openings, and energy efficiency.Temperature Control and Monitoring: Precision temperature control systems, often featuring digital controllers and sensors such as thermocouples or RTDs (Resistance Temperature Detectors), maintain the desired temperature setpoints within the freezer. Integrated monitoring systems may include alarms, data logging capabilities, and remote monitoring options to ensure temperature stability and alert users to any temperature deviations or equipment malfunctions.Storage Capacity and Organization: Ultra-low freezers are available in various sizes and configurations, ranging from compact benchtop units to large upright or chest freezers with multiple compartments or shelves. Internal storage configurations may include adjustable shelving, racks, and storage boxes to optimize space utilization and organization of samples. Applications of Ultra-Low Temperature Deep Freezers:Biological Sample Storage: Laboratories, research institutions, and biobanks use ultra-low freezers to store biological samples, including DNA, RNA, cell lines, tissues, and other specimens, for long-term preservation and research purposes.Medical and Pharmaceutical Storage: Ultra-low freezers are essential for storing temperature-sensitive medical products, vaccines, pharmaceuticals, and biologics that require stringent temperature control and stability to maintain efficacy and safety.Clinical and Diagnostic Applications: Hospitals, clinics, and diagnostic laboratories use ultra-low freezers for storing diagnostic reagents, enzymes, patient samples, and other critical materials used in clinical testing and analysis.Research and Development: Scientists, researchers, and pharmaceutical companies rely on ultra-low freezers for storing research materials, experimental samples, and valuable specimens essential for advancing scientific knowledge, developing new therapies, and conducting innovative research projects.

Product Details:

COD analysis requires digestion of samplers using potassium dichromate and sulphuric acid. HAMCO offers two models HAMCO109A which can accommodate 6 sample at a time and HAMCO109B which can accommodate 15 sample at a time . The digested sample is then titrated against FeS04 .

Features & Benefits:

1. Type of Heater: Alluminium solid Block Heater will be provided for Uniform heating.
2. Max Working Temperature: 200° C
3. Cartridge Heater for reaching the work temperature max at heating rate of 5-25° C
4. Temperature Controller:-

• Temp. is controlled by microprocessor based PID temp. controller.
• Timer will be provided for running the holding time for sample.
• Auto switch off on the completion of heating cycle and will horn the buzzer.

5. Input Power Supply: 230 V AC, 50 HZ, 1 Phase.
6. Thermocouple: Calibrated RTD type thermocouple will be provided capable of measuring upto 200 C at accuracy of +/- 0.1° C
7. Control Panel/Display:

• Digital Display for Present, Set temperatures, time duration and temperature profile.
• Switch Gear for on/off main and heater indication will be provided.

8. Safety Interlocks/Relay:-

• Overload safety cut-off
• Overload temperature cut-off
• Safety for input power fluctuation.
• 1-Phase Indication Lamp.
• Emergency Switch off

9. Construction:-

• Double walled construction, thermally insulated with cooling system for better performance during continuous operation.
• Powder coated external
• Surface for esthatic
• Appearance

Accessories supplied with equipment:-

• Reaction Vessel: 6 no. (CAT NO HAMCO109AC1) for HAMCO109A or 15 no. for HAMCO 109B
• Air Condensor: 6 no. (CAT NO HAMCO109AC2) for HAMCO109A or 15 no. for HAMCO 109B
• Stand for reaction vessel: 1 no. (CAT NO HAMCO109AC3)
• Stand for aircondensor: 1 no. (CAT NO HAMCO109AC4)

Spares required for 5 year trouble free operation:

• Reaction Vessel: 6 no. (CAT NO HAMCO109AC1)
• Air Condensor: 6 no. (CAT NO HAMCO109AC2)
• Temperature Controller: 1 no. (CAT NO HAMCO109S1)
• Solid State Relay: 1 no. (CAT NO HAMCO109S2)
• Switchgear (Mainswitch & Bulb): 3 no. each (CAT NO HAMCO109S3)

Electrical Requirement:

• 220-240 V, 50/60 Hz, Single Phase, 10.9A
• 115 V, 50/60 Hz, Single Phase, 20.8A

Product Details:

Features:
Fully automatic with PLC touch-screen colored displaySingle Unit; no assembly required With automatic oxygen filling, direct reading on the screen, standardization facility and memory storage of 400 dataTemprature resolution- 0.001 degree c and RSD +/- 1 percent.With 100 tablets of 1gm benzoic acid or known calorific value(imported)Used for determination of combustion of heat of calorific value of the fuel & other organic materialSupplied complete with water jacket made of Brass/S.Steel sheet duly nicked chromium plated with Bakelite LidS. Steel Bomb, Bomb Jacket Water Calorimeter VesselMotorized heavy duly stirrer for uniform CirculationBriquette, Pet tel Press heavy dulyFiring unit with illuminationVibrator & Buzzer, spanners, magnified glass with nickled nichrome wire & Cotton reelGas Releasing Valve, S.Steel crucibleBenzoic Acid with know calorific valueFull feature digital controller & Safety deviceNote: we also have manual, sem-automatic and economical models.

Product Details:

Deep freezer/low temperature cabinet horizontal/vertical -80 degrees c hamco make deep-freezer / ultra deep freezer cabinets are in conformity with all requirements of industry for economic way to create temperature below freezing point to suit various standards application in the field of, science & research for storage & testing in biology, anatomy, chemistry & in many other fields, for industry & science.

Product Details:

We are engaged in offering a wide range of   Bomb Calorimeters to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Oxygen Bomb Calorimeter' to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Ultra Low Deep Freezer to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of  Humidity Test Chamber to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of Low Temperature Chamber   to our clients. Our range of all products is widely appreciated by our clients

Product Details:

CERTIFICATIONSOUR Drum Heaters ARE “CE” Certified . We as company is ISO 9001:2008 Certified Company.MODEL & FEATURESHAMCO 163 Digital Drum Heaters are suitable for melting 210 ltr drum by wrapping around the metal drum and will heat up from sides. The drum heater can move into 5 mtr periphery and can go to drum as it is mounted on castor wheel.TEST METHOD The Hamco Drum Heater is suitable to melt sample max up to 130 deg C . Still the Max temp dependent upon the specific heat of the sample and environmental conditions. It is suitable only for metal drums and not the plastic drums. It also suitable for only 210 Ltr drum which is having outer dia of approx. less than 24” and height approx. 36”. In this type of drum heating , we need to take the drum heater near the drum and as the drum heater is split half, just open it and clamp it around the drum. Put the temp sensor inside the drum of the drum heater. As the sensor tip is sharp , it will penetrate in solid sample very easily and set the desired temp.STANDARDNon Flame proofTEMP RANGETemperature Range Ambient to 130 deg CMOUNTINGMounted on Castor wheel for easy Movability.CONSTRUCTION STANDARD MODEL Outer Body GI Duly Powder Coated. Inner Body G.I with High temp silver paint. Control panel on split half for each half and mounted on outer periphery. Castor wheel GI casted Heavy duty with 360 deg Rotation.Non lockable type.TEMPERATURE SENSOR PT-100 in stainless steel sheath with sharp Tip and Head on top.LOCKING Hinge type two half. Pull cam type lock on upper and lower side.HEATING Consealed SS Tubular Heater of 1.0 Kw x 12 Nos. Each Half consist 1.0 Kw x 6 Nos Heater. The heater is mounted equally Horizontal and vertical position for Uniform Heating. The Phase distribution is uniform for Uniform Heating. Total Rating 12.0 Kw with 4.0 Kw Heating/Phase.CONTROLLER Digital PID Temp Controller for Temperature controlling. It is also having inbuilt timer where you can set the desired Time holding period after reaching desired temperature. Audio alarm after desired time interval finishes.DISPLAY Temperature Controller of Itherm Make shows the data of PV & SV of Temperature. Energy regulator for Each Phase for Each split Half. Switchgears shows the status of Heater, Phase.CONTROLLING SYSTEMThe controlling system is Microprocessor based PID Controllers , Relays, Contactors, Overload Trip devices, MCB.The control panel has below features. IP 22 Protection. Separate Earthing. Controls Temp using PID Loops. Timer which Horns after reaching desired temp and sustained time. Phase indication in case of phase failure.SAFETY Over temperature Protection. Short-circuit protection. Over Load Protection. Over Current Protection.ACCESSORIES SUPPLIED ALONG WITH THE INSTRUMENTS Drum Heater with 5 Mtr Long Cable Separate Earthling Wire to ground the drum Heater`SPARES REQUIRED FOR 5 YEAR TROUBLE FREE OPERATION(AT EXTRA COST. NOT INCLUDED IN PRICE) CONTACTOR -- 1 NO. ENERGY REGULATOR -- 3 NO. DRUM HEATER TEMP SENSOR – 1 NO SWITCHGEARS – 1 NO DRUMHEATER HEATER -1 SET OF 12 NOS HEATERUTILITIES(PREINSTALLATION REQUISITE)AT BUYER SCOPE Power supply 3 Phase 230V AC 50HZ , 4.0 Kw/Phase Separate Earthing ProvisionPOWER SUPPLY Power supply 3 Phase 230V AC 60HZ , 4.0 Kw/Phase Total Rating 12.0 KWDIMENSION & NET WEIGHT OF EQUIPEMTN 34”x32”x36” (87x81x92)Net Weight: 60 lbs (27kg)SHIPPING INFORMATION Shipping Weight: 88 lbs (40kg)Dimensions: 27 Cu. ft.DOCUMENTS SUPPLIED ALONG WITH THE INSTRUMENTS. Digital Temp Indicator Certificate. SD,IQ,OQ,PQ document Electrical Wiring Diagram. Maintenance Manual. Heater Certificate.TYPE OF DRUM HEATER TYPE OF ELECTRICAL RESISTIVE TYPE DRUM HEATING SYSTEM

Additional Information:

• Item Code: HAMCO36A
• Delivery Time: REAY STOCK
• Packaging Details: • Shipping Weight: 88 lbs (40kg) Dimensions: 27 Cu. ft.

Product Details:

We are engaged in offering a wide range of   SS Laboratory Vacuum Oven' to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We manufacture double walled vacuum ovens. To avoid the thermal loss the gap between the two walls is filled using the glass wool. The temperature is controlled using digital temperature controller.

Product Details:

We are engaged in offering a wide range of  Walk In Environmental Test Chambers to our clients. Our range of all products is widely appreciated by our clients

HAMCO Make Muffle furnace are used for routine laboratory application like incineration , backing, drying, annealing, heat treatment of metal and material testing, ash content , volatility of matter etc.HAMCO Make muffle furnace are light weight , compact design, short up heating time , high grade insulation and with all safety features to provide the best of the accuracy.Specifications:-• Type of Furnace: Electrically Heated Muffle furnace.• Working Temp Range : 5 degree above ambient to 1100 deg• Maximum Working temperature : 1200 deg c for Max 1 hr only• Temp Accuracy: +/- 3 degree.• Temp. Uniformity: +/- 5 degree throughout the chamber.• Muffle is made of siliminite. Make “Kumar” Brand.• The lining of the door is done by High quality Mythan bricks.• Temp. Display: Digital LED 3 ½ digit, Resolution 1 degree C.• Back Port ventury system for quick exhaust.• A grade K type sensor used for better accuracy.• No contact of Hot surface to body for heat loss prevention.• Front Hole for observation with shutter Knob.Construction:-• Double walled, gap between body and muffle will be filled by high density ceramic blanket.• Standard Model: Body is made of heavy gauge Powder- coated CRC exterior. • GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.• Hinged door with single lever for door lock.• 4” Thick heavy density ceramic blanket Insulation.• Unit Mounted on castor wheels with front lock arrangement.Heater:-• Heater is made of Kanthal A1 wire wounded equally on the muffle.• The original Kanthal certificate will be submitted at the time of delivery.• The heater is designed with low watt density for better life of the heater and to remove thermal shock to the chamber.Control Panel:-• Microprocessor based PID temp. Controller with auto tune facility for precise control of temperature.• Temp. Sensor: K type. Measure Maximum up to 1200 deg C.• Necessary switch gears to indicate the status of the power supply and heater.• Main switch MCB for switching on/off the power.• Dedicated safety controller with separate sensor to cut off the heater in case of overshoot. (Optional , Extra at cost)• Microprocessor based PID Profile controller , Programmable up to 8 steps /segment per programme of Ramp/soak Profile, In built memory for resumption of running programme in case of power disturbance, auto switch of on the completion of the cycle , Programmable heating rate up to 5 to 25 deg C /minute. (Optional, extra at cost) ( PFU-400 )• Recorder data bank offline to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional) ( RCR-11)• PC Interface communication card with RS 485 for temperature control system ( Hardware only) ( optional)(PCL-1)• PC Interface software for temperature controlling as well as online recording with facility to visualise the data in chart form, in bar chart form, in graph form or in excel worksheet form.( Optional , extra at cost)(SOFTWARE -1)Safety Features:-• Over heat temperature cut off by safety temperature controller ( Optional at extra cost).(SAFETY-1200)• Electrical overload safety by MCB.• Door switch to cut off the heater when open the door. ( Optional at extra cost) (DRS-11)• Electrical short circuit breaker by MCB.Insulation:-• High density ceramic blanket is used for insulation.• Door line will be done by hard grade Mythan bricks.• Furnace lining also done by hard grade Mythan bricks.UTILITIES (Pre Installation Requisite):-• Power supply of 230 V Ac, 50 HzRoom Exhaust fan or window or Fume hood near furnace table.Certificate:-• Calibration Certificate traceable to ERTL /NPL for temp calibration• Original Kanthal wire batch number certificate.• IQ, PQ, OQ validation manual.

Product Details:

 

We are engaged in offering a wide range of  HAMCO Ultra Low Deep Freezer' to our clients. Our range of all products is widely appreciated by our clients

The Purpose of water bath is to incubate sample in a water bath at constant temperature over period of time. Hence constant temperature water bath serves as an important Quality attribute of the product.HAMCO Make GMP constant temperature water bath are especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term , intermediate and accelerated stability studies.SPECIFICATIONS :-  Temperature Range 5.0 °C above ambient to 95 °C. Accuracy +/- 2 °C. Temperature Display : Digital LED 3 digit, Resolution 1 deg C Heating system: U shaped Nichrome wire heater in SS Sheathing.CONSTRUCTION :- Double walled , gap between walls filled with High grade glass wool Insulation. Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel. Unit Mounted on Rubber leg.CONTROL PANEL :- Microprocessor based PID temp. controller with auto tune facility for precise control of temperature. Or thermostatically controlled temp control system analogue type. Temp. Sensor : PT- 100. Dedicated safety controller for over temperature safety. Recorder data bank to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional) Alarm : Audio visual alarm if temperature deviates from the preset temperature. PC Interface communication card with RS 485 for temperature and humidity control system ( Hardware only) ( optional) Over heat temperature. Electrical short circuit breaker.UTILITIES (pre installation requisite):- Distilled water or DM Water Line. Room temperature around machine preferably at 25 degree C. Stabilised input voltage of 230V Ac, 50 Hz, 20 Amps.DATA RECORD :- 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded) Multilevel Passwords. Data storage device has online and offline capabilities. Multi chamber data acquisition on single software. Tabular and graphical report, alarm deviation report. Mean Kinetic temperature report and alarm deviation report. Audit trial report. Attractive reports and graphs. Alarm report. Time synchronisation.

Additional Information:

• Item Code: HAMCO24
• Minimum Order Quantity: 1 Piece
• Delivery Time: READY STOCK

Product Details:

Test method: - determines the ‘gross Calorific value ‘of any solid or liquid sample by determining the water equivalent by burning 1 gm of known CV sample.Standard: - confirm to the specification ASTM D4809 ASTM D5865, D 240, DE711, IS -1350- 1966, BS 1016 PART 5-1967, IP 12/63 T.Features & benefits: -1)Type of method: - Isoperibol.2)Method of detecting temp. Rise : automatic3)Method of detecting calorific value : automatic.4)Method of Oxygen Filling : Automatic.5)Method of Jacket temp control : Through external chiller.6)Touch Screen PLC.7)Automatic measurement and calculation of Calorfic value / water equivalent/Auto jacket temp control/ Bucket filling Manual8)4.3” Color display.9)Thermal printer interface with printout report.10)Auto alarm on completion of test.11)Pc interface for data recording.12)Weight of the sample to be filled by keyboard.13)Calorimeter vessel made of Copper Electroplated.14)Bomb support to ensure correct positioning of bomb in vessel.15)Ambient working temp range : 15 to 35 degree c16)Heat capacity EE Value:- 2200 to 2600 cal/deg c17)Process time: - 8 to 12 minute.
18)RSD 0.1 to 0.2 % on Standard sample of Benzoic acid.19)Temperature resolution :- 0.0001 deg c.20)Oxygen bomb endure pressure : 300 kg/cm21)Humidity requirement : less than 85%22)Power supply: 230a VC, 50 Hz, 10 amp.23)Heating load: 2 kW.24)Control panel/display :-a.Digital display of temperature.b.Auto temp. Rise detection based on microprocessor chip based. User has to press one button and is free for doing other thing while microprocessor will take reading automatically.c.Automatic reading for temp. Rise calculation.d.All the necessary interlock for stirrer, ignition wire continuity, wire loose, over load etc.e.Electrode short indication.f.Continuity test indication.g.Auto stop of the stirrer after completion of test.h.Buzzer horn after completion of the test.25) Safety interlocks/ relay :-a.Over load protection.b.Electrode short protection & indication.c.1-phase indication lamp.d.Emergency switch off26) Construction :-a.Double walled construction, thermally insulated by pouring approx. 18 ltr water in the outer jacket.b.Made of full stainless steel.Accessories will be supplied with equipment: -1.SS bomb (cat no : hamco 6ac 1)2.Calorimeter vessel with bomb support.3.Insulated outer jacket with calorimeter vessel support.4.Combined lid for outer jacket & calorimeter vessel.5.Connecting tubes (copper / flexible) for filling oxygen in the bomb: 3 nos.6.Spanner for oxygen valve & copper tube connection.7.Oxygen control valve. (cat no : hamco 6ac 2)8.Pressure gauge on stand with bomb lid stand.9.Safety device.10.Pellet press. (cat no : hamco 6ac 3)11.Stirrer unit12.Automatic electronic firing unit with digital Beckmann thermometer. (microprocessor based)13.Connecting wire [electrical].14.Hook for lifting bomb. (cat no : hamco 6ac 4)15.Crucible. [stainless steel] (cat no : hamco 6ac 5)16.Cotton reel(cat no : hamco 6ac 6):01 no. (approximately 200 meters)17.Bomb ‘o’ ring (cat no: hamco 6ac 7): 01 no.18.Teflon tape: 01 no.19.Valve body ‘o’ ring (cat no: hamco 6ac 8): 01 no.20.Ignition wire (cat no: hamco 6ac 9): 100 meters.21.Schrader valve (cat no: hamco 6ac 10): 01 nos.22.Bursting discs for safety device 12 nos: 1 set. (cat no : hamco 6ac 11)23.Benzoic acid of known calorific valve. { 6319 cal / gram }24.Valve key. {4 sided key used for replacing/tightening Schrader valve, see (p) in precautions on page 12}25.Printer26.Pc interface cable.27.External chiller with Tubing.28.2000 ml Weighing Balance / 2000 ml Pipette.29.Operating manual.
Spares required for 5 year trouble free operation: -1)Cotton reel (cat no: hamco 6ac 6):05 no. (approximately 200 meters)2)Bomb ‘o’ ring (cat no: hamco 6ac 7): 02 no.3)Valve body ‘o’ ring (cat no: hamco 6ac 8): 02 no.4)Ignition wire (cat no: hamco 6ac 9): 100 meters.5)Schrader valve (cat no: hamco 6ac 10): 01 nos.

HAMCO Make Pharma refrigerator is designed to meet the testing challenges of the competitive pharmaceutical research field. It serves as the perfect environment for refrigerated storage , conduction of shelf life studies and general incubation.SPECIFICATIONS :- Temp. controller : Microprocessor based PID control with auto tune facility. Temperature sensor : RTD Pt 100. Temperature display : Digital LED 3 ½ digit. U shaped nichrome wire heater in ss sheathing. Cooling : CFC free compressor utilising R 134a eco friendly refrigerant , with condenser , motor and relay . Air circulation : With flange motor and blower. Feet : Castor wheels. Trays : SS wire mesh , Heavy duty. Construction : Double walled with poly urathene ( PUF) insulation provided with outer full length glass viewing door with locking arrangement.CONSTRUCTION :- Double walled , gap between walls filled with PUF Insulation. Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel. 3” Thick CFC Free Puff Insulation. Stainless steel Trays. Adjustable Tray Height adjustment. Unit Mounted on castor wheels with front lock arrangement.
CONTROL PANEL :-Microprocessor based PID temp. controller with auto tune facility for precise control of temperature Temp. Sensor : PT- 100 Recorder data bank to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional) PC Interface communication card with RS 485 for temperature and humidity control system ( Hardware only) ( optional
SAFETY FEATURES :- Over heat temperature cut off . Electrical overload compressor cutoff. Time delay for compressor switch on. Electrical short circuit breaker.UTILITIES (pre installation requisite):- Room temperature around machine preferably at 25 degree C. Stabilised input voltage of 230V Ac, 50 Hz, 20 Amps. Water drain line with ½” Nozzle to be provided at floor level.DATA RECORD :- 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded) Multilevel Passwords. Data storage device has online and offline capabilities. Multi chamber data acquisition on single software. Tabular and graphical report, alarm deviation report. Mean Kinetic temperature report and alarm deviation report. Audit trial report. Attractive reports and graphs. Alarm report. Time synchronisation.

Product Details:

HAMCO Make Deep freezer is exceptionally efficient, reliable and durable. It ensures safe and dependable sample storage and is ideal for longer term storage of materials at a low temperature range.Application ranges, storage and preservation of valuable biological products, enzymes, virus, serum, blood plasma, heat sensitive vaccines, insulin, lever extract, medicinesSpecifications:- Temperature range: -20 /-40/-80 degree C. Temp. Controller: Microprocessor based PID control with auto tune facility. Temperature sensor: RTD Pt. 100. Temperature display: Digital LED 3 ½ digit. Chamber illumination: Florescent Light with door switch. Cooling : CFC free compressor utilising R 404 eco-friendly refrigerant , with condenser , motor and relay .(up to -20 degree c) Cooling : Cascade control with CFC free compressor utilising R 23 eco-friendly refrigerant , with condenser , motor and relay .(up to -40 degree c) Cooling : Cascade control with CFC free compressor utilising Suva 95 eco-friendly refrigerant , with condenser , motor and relay .(up to -80 degree c) Feet: Castor wheels. Trays: SS wire mesh, Heavy duty. Construction: Double walled with poly urethane (PUF) insulation provided with outer full length glass viewing door with locking arrangement.Double walled, gap between walls filled with PUF Insulation. Standard Model: Stainless steel Mirror polished chamber and heavy gauge Powder- coated CRC exterior.  GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel. 3” Thick CFC Free Puff Insulation. Stainless steel Trays. Adjustable Tray Height adjustment. Unit Mounted on castor wheels with front lock arrangement.Control Panel:- Microprocessor based PID temp. controller with auto tune facility for precise control of temperature Temp. Sensor : PT- 100 Recorder data bank to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional) PC Interface communication card with RS 485 for temperature and humidity control system( Hardware only) ( optional)Safety Features:- Electrical overload compressor cut off. Time delay for compressor switch on. Electrical short circuit breaker.Utilities (Pre Installation Requisite):- Room temperature around machine preferably at 25 degree C. Stabilised input voltage of 230V Ac, 50 Hz, and 20 Amps. Water drains line with ½” Nozzle to be provided at floor level.Data Record:- 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded) Multilevel Passwords. Data storage device has online and offline capabilities. Multi chamber data acquisition on single software. Tabular and graphical report, alarm deviation report. Mean Kinetic temperature report and alarm deviation report. Audit trial report. Attractive reports and graphs. Alarm report. Time synchronisation.

Product Details:

HAMCO Make Muffle furnace are used for routine laboratory application like incineration , backing, drying, annealing, heat treatment of metal and material testing, ash content , volatility of matter etc.HAMCO Make muffle furnace are light weight , compact design, short up heating time , high grade insulation and with all safety features to provide the best of the accuracy.SPECIFICATIONS :- Type of Furnace : Electrically Heated Muffle furnace. Working Temp Range : 5 degree above ambient to 900 deg c Maximum Working temperature : 1000 deg c for Max 1 hr only Temp Accuracy : +/- 3 degree . Temp. Uniformity : +/- 5 degree throughout the chamber. Muffle is made of siliminite. The lining of the door is done by High quality Mythan bricks. Temp. Display : Digital LED 3 ½ digit , Resolution 1 degree C. Back Port ventury system for quick exhaust. A grade K type sensor used for better accuracy. No contact of Hot surface to body for heatloss prevention. Front Hole for observation with shutter Knob.CONSTRUCTION :- Double walled , gap between body and muffle will be filled by high density ceramic blanket . Standard Model : Body is made of heavy guage Powder- coated CRC exterior. GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel. Hinged door with single lever for door lock. 4” Thick heavy density ceramic blanket Insulation. Unit Mounted on castor wheels with front lock arrangement.HEATER :- Heater is made of Kanthal A1 wire wounded equally on the muffle. The heater is designed with low watt density for better life of the heater and to remove thermal shock to the chamber.CONTROL PANEL :- Microprocessor based PID temp. controller with auto tune facility for precise control of temperature. Temp. Sensor : K type . Measure Maximum upto 1200 deg C. Necessary switch gears to indicate the status of the power supply and heater . Main switch MCB for switching on/off the power. Dedicated safety controller with separate sensor to cut off the heater in case of overshoot . (Optional , Extra at cost) Microprocessor based PID Profile controller , Programmable upto 8 steps /segment per programme of Ramp/soak Profile, In built memory for resumption of running programme in case of power disturbance, auto switch of on the completion of the cycle , Programmable heating rate upto 5 to 25 deg C /minute. (Optiopnal, extra at cost) ( PFU-400 ) Recorder data bank offline to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional) ( RCR-11) PC Interface communication card with RS 485 for temperature control system ( Hardware only) ( optional)(PCL-1) PC Interface software for temperature controlling as well as online recording with facility to visualise the data in chart form, in bar chart form, in graph form or in excel worksheet form.( Optional , extra at cost)(SOFTWARE -1)SAFETY FEATURES :- Over heat temperature cut off by safety temperature controller ( Optional at extra cost).(SAFETY-1200) Electrical overload safety by MCB. Door switch to cutoff the heater when open the door. ( Optional at extra cost) (DRS-11) Electrical short circuit breaker by MCB.INSULATION :- High density ceramic blanket is used for insulation. Door line will be done by Hard grade Mythan bricks. Furnace lining also done by Hard grade Mythan bricks.UTILITIES (pre installation requisite):- Power supply of 230 V Ac, 50 Hz Room Exhaust fan or window or Fume hood near furnace table.CERTIFICATE :- Calibration Certificate treacable to ERTL /NPL for temp calibration IQ,PQ,OQ validation manual.

Additional Information:

• Item Code: HAMCO60S
• Delivery Time: REDAY STOCK
• Packaging Details: Chamber 23 X 10 X 10 Over All 45 X 35 X 35

Product Details:

We are engaged in offering a wide range of   Hot And Cold Test Chamber to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Vertical Autoclave Sterilizer to our clients. Our range of all products is widely appreciated by our clients

Product Details:

A flameproof stability chamber designed for aerosols is a specialized piece of equipment that provides a controlled environment for storing and testing aerosol products in potentially explosive atmospheres. Given the flammable nature of certain aerosol formulations, it's crucial to ensure safety by preventing any ignition sources from coming into contact with the aerosol. Here's a description of such a chamber:

Flameproof Stability Chamber for Aerosols:

1. Construction Material: Typically made of robust materials like stainless steel or other non-sparking materials that can withstand the pressure and temperature requirements. The construction ensures that the chamber can contain any explosion or fire within its confines.

2. Explosion-proof Design: All electrical components, including lighting, sensors, and controls, are housed within the chamber in a manner that prevents any sparks or electrical malfunctions from igniting the aerosol. This is achieved by using explosion-proof fittings and ensuring that all electrical equipment meets specific safety standards.

3. Ventilation: The chamber is equipped with specialized ventilation systems that can handle flammable vapors and gases. These systems ensure that any buildup of flammable substances is safely removed from the chamber, minimizing the risk of explosion.

4. Temperature and Humidity Control: The chamber provides precise control over temperature and humidity levels, allowing manufacturers to test aerosol products under various conditions to assess stability, performance, and safety.

5. Safety Features:

   • Pressure Relief Valves: These are installed to release pressure in case of an internal explosion, preventing catastrophic failures.
   • Gas Detection Systems: Sensors and alarms are integrated to detect any flammable gases or vapors, activating safety protocols if detected.
   • Emergency Shutdown: A manual or automatic shutdown system is in place to cut off power and ventilation in case of emergencies.

6. Monitoring and Control System: Modern flameproof stability chambers are equipped with advanced monitoring and control systems. These systems allow operators to monitor conditions inside the chamber remotely, set parameters for tests, and receive alerts for any anomalies.

7. Compliance with Standards: The design and construction of the chamber adhere to international standards and regulations specific to hazardous locations and equipment, ensuring that it meets all safety requirements.

Applications:

• Product Development: Testing the stability, performance, and safety of aerosol formulations during the product development phase.
• Quality Control: Ensuring that aerosol products meet regulatory standards and specifications.
• Research: Investigating the behavior of aerosols under different environmental conditions to improve formulations and packaging.

In summary, a flameproof stability chamber for aerosols is a specialized equipment designed to provide a safe and controlled environment for testing and storing flammable aerosol products. By incorporating robust construction, explosion-proof design, and advanced safety features, these chambers ensure compliance with safety standards and minimize the risk of fires or explosions.

Additional Information:

• Item Code: HAMCO44PG
• Production Capacity: 100 P.A
• Delivery Time: 4 week
• Packaging Details: Wooden Box

Product Details:

Introduction :
“HAMCO” make Constant Temperature Water Bath are designed and fabricated to suit various I.S. standards application in the growing field of Medical, Agricultural Institution, Bio-Chemical Industrial, Research laboratories and Various Industries.

Features :
 

Product Details:

Minimum Space Oven For Coal

• For the determination of moisture in coal and coke by drying in an atmospheric / nitrogen atmosphere as described in BS 1016 / ASTM D 3302.

• A provision for renewing the preheated air in the oven at the rate of one to four times a minute, with the dry air.

• An exhaust change-over valve allows the output flow meter to be by-passed during operation, preventing the build of condensation in the flow meter 

• Timer provided to set the operation time.