Oil And Petroleum Testing Instruments

Product Details:

Test Method: - Flash Point is lowest temperature at which application of the ignition source causes the Vapour of a specimen of the sample to ignite under the specified condition of the test.The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached.
Standard: - Conforms to the specifications of:ASTM D93; IP 34; ISO 2719
Features & Benefits:-
1)     Temp. Range: 40 to 400° deg C.
2)     Test Method: ISO 2719, ASTM D 93, IP 34, IS 1448 (P-21).
3)     Ignition Source: Electrical ignitor with LPG gas connection.
4)     Temperature Sensor: PT-100 in stainless steel sheath.
5)     Flash Detector: CRC Thermocouple.
6)     Controller: Touch Screen, Colour Display with PLC with audio visual alarm to check the machine. 3-wire RTD temperature sensor, free potential flame detector sensor as i/p. with automatic barometric reading correction.
7)     Inbuilt storage memory for Flash Detection.
8)     Flame-Sampling Arrangement: 10 Rpm, D.C. 12 v or 24V DC, gear motor, vertical movement reciprocating to & fro motion.
9)     Heater: 800 W, 230v.
10)  Electrical ignition flame-sampling. Ignition transformer having continuous o/p of 10.6 Kv. D.C. from 230 v A.C. i/p.
11)  Equipment Overall Size (LxWxH): 280mm (W) X 530mm ( D ) X 415 mm ( H )
12)  Equipment Gross Weight: 22 Kg.
13)  Equipment supply will be 230 V Ac, 50 Hz with 15 amp capacity.
Features:-Single Action Setting: - The Flash Detection sensor and temperature sensor are permanently mounted on a lid, which allows easy setting of the specimen.Easy Operation: - Select a Test Mode and enter the expected flash Point. While instrument executes the test, you are free to do other lab work. The tester follows the exact procedures prescribed in the test method and the completion of the test cycle is signalled by buzzer. The test result is brightly shown in VFD and same will be stored in the HMI.
Automatically Shut The Machine And Horn The Buzzer In The Case:

Accessories Will Be Supplied With Equipment:-
1)     Pensky Martene  Cup & Lid  --  1 No (Cat No Hamco30ac1)
2)      Thermal Printer  -- 1 No (Cat No Hamco30ac7)
3)     Thermal Printer Roll  --  1 No (Cat No Hamco30ac8)
4)     Pc Interface Cable – 1 No. (Cat No Hamco30ac9)
5)     Software For Above-- 1 No. (Cat No Hamco30ac10)
6)     Thermal Fuse – 1 No. (Cat No Hamco30ac5)
7)     Signal Cable - 1 No. ( Cat No Hamco 30ac6)
Ordering Information:-

Product Details:

This flash point and fire-point test method is a dynamic method and depends on definite rates of temperature increases to control the precision of the method. Its primary use is for viscous materials having a flash point between 79°C (175°F) and 400°C (752°F) except fuel oils, to define the hazards of flammable and combustible materials used in shipping and safety regulations.

The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions

• The flash point is the lowest liquid temperature at which application of the flame causes the vapors of the test specimen of the sample to ignite.

• To determine the fire-point, the test is continued until the application of the test flame causes the test specimen to ignite and sustain burning for a minimum of 5s.

It is an automatic flash and fire-point tester used to examine liquid as well as highly viscous samples in the same instrument without any additional equipment. For substances with unknown flash points, the APPARATUS has a special search mode program. During the entire heating period, the test flame is moved across the sample at suitable intervals. The expected flash point of a specimen can thereby be found in a time saving and economical manner.

• Optional On demand: When examining highly viscous specimens, a preheating time and temperature are set in order to warm-up and liquefy the sample to inserted temperature probe without problem. Further a skimmer is removing the surface skin from bituminous samples.

• Standard Cup with handle, made of brass

• Temperature Probe Pt-100 for sample temperature

• Electric Gas Igniter with connector cable and plugs

Flame Detection Unit for the detection of flash- and fire-points Flame Arrest Cover for extinguishing the fire in the cup PC Interface Programmed Controller. The Unit is incorporated with MODBUS RTU PC interface Microprocessor based PID Programmable
controller user friendly features.

Details:

Fully Automatic Flash and Fire point apparatus.

• Controller: Microprocessor based process controller cum indicator with touch screen with LED Display with audio visual alarm to check the machine. 3-wire RTD temperature sensor, free potential flame detector sensor as i/p. The controller having capacity of storing 200 data with automatic barometric reading correction.

• It is with PC Interface for data storing.

• Printer with data interface cable for taking the reading of Flash Point after completion of the cycle.

• Flame-Sampling Arrangement: 10 Rpm, D.C. 12 v or 24V DC, gear motor, vertical movement reciprocating to & fro motion.Heater: 800 W, 230 v.

• Electrical ignition for pilot flame-sampling. Ignition transformer having continuous o/p of 10.6 Kv. D.C. from 230 v A.C. i/p.

Product Details:

* Fully Automatic Softening Point Apparatus
* Standard : ASTM D 36, IP 58.
* "CE" Certified Instrument. 
* Control Panel : HMI Color Touchscreen PLC 
* Softening Point Detection : Fully Automatic No Manual Intervention required.
* Memory : Storage Memory of 400 Data
* Printer : Inbuilt Printer
* Software : PC software for analysis and print of data.
* Consist of 600 ML Beaker, Teflon Magnet, SS Ball, SS Ring, Guide, PC Interface cable, Thermal Printer Roll.
* Capacity : 2 sample at a Time.
* Analysis : Maximum, Minimum or Average.
* Media : Water, Glycerine, Silicon
* Temp Range : Water (Upto 95 Deg C), Glycerine ( Upto 150 Deg C ), Silicon ( Upto 250 Deg C).
* Having more than 250 Installation in India and abroad.
* Hamco as a company is ISO 9001: 2005 Certified company

Additional Information:

• Item Code: HAMCO65C
• Production Capacity: 500 Pc/Year
• Delivery Time: READY STOCK
• Packaging Details: CARDBOARD BOX 27 X 22 X 45 CM GROSS WEIGHT : 30 KG

Product Details:

Kinematic Viscosity Bath AS PER , Viscosity Bath (IP71) for the temperature of 40 degree and 100 degree and also refrigerated upto -35 degree C.:Kinematic viscosity Bath as per ASTM with temp. Range room temp. to 150 deg C along with temp. accuracy +/- 0.1 degree centigrade to accommodate 5 viscometer at a time along with Viscometer holder. It consist illumination facility for better visibility. The stirrer is for better uniformity throughout the chamber. Temp. controlled by thyristor drive temp. indicator cum controller.

Product Details:

Test Method: -Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures.
Standard: -Conforms to the specifications of: ASTM D445, D2532, D6074, D6158, IP 71, ISO 3104, DIN 51550;FTM 791-305.
Features & Benefits: -
1)     Type of bath: - electrically heated round bath.2)     No of viscometer can be accommodated: 5 no.

3)     Inner chamber dimension: 12” dia x 12” height
4)     Outer body size: 15” x 15” x 24”
5)     Max working temperature :- 150.0 degree c
6)     Bath capacity: - 5 sample at a time.
7)     Bath volume : 20 Ltr capacity
8)     Heater: - SS tubular heater.
9)     Accuracy :- +/- 0.01 to +/- 0.03  degree c
10)  Readability :- +/- 0.01 deg. c up to 99.99 deg. and 0.1 deg. c Up to 150.0 deg. c
11)  Temperature controller :-
a.     Temp. Is controlled by microprocessor based PID temp. Controller  of Eurotherm or reputed make,
b.    It is having dual display with solid state relay for switching on & switching off the heater.
12)  Input power supply: 230 v ac, 50 Hz, 1 phase with 12 amp current rating.
13)  Heating load: 2 kW

14)  Thermocouple: -a.     Calibrated RTD type thermocouple will be provided capable of measuring up to 150 deg. c at accuracy of +/- 0.01 deg. C

16)  Safety Interlocks/ Relay: -

a.     Overload safety cut-off
b.    Safety for input power fluctuation
c.     1-phase indication lamp.
d.    Emergency switch off

17)  Construction: -

a.     Double walled construction, thermally insulated with high density puff.
b.    Powder coated external surface for esthetic appearance.

Accessories Will Be Supplied With Equipment: -
1)     Universal viscometer holder  --  2 no (cat no hamco48s1)
2)      suction bulb  -- 1 no (cat no hamco48s2)

3)     Glass fuse --  1 no (cat no hamco48s3)

4)     Glass viscometer with constant at 40,50 & 100 degree c of any size and any type with calibration certificate traceable to cannon oil USA (cat no hamco48s4) {on demand of customer only price extra}

Product Details:

test method :- aniline point is used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. Equal volumes of aniline and sample or sample plus n-heptane are stirred together while being heated at a controlled rate. After the two phases become miscible, the mixture is cooled at a controlled rate and the temperature at which the two phases separate is the aniline point or mixed aniline point of the sample.

standard :- conforms to: astm d611; ip 2; iso 2977; din 51775; ftm 791-3601.

features & benefits :-

for aniline point and mixed aniline point determinations according to method b. Stirs aniline-sample mixture in a borosilcate glass thin film tube suspended in a heating bath. Thin film of mixture flows over a light well illuminated by a variable 6v lamp. Adjust heating rate per specifications using accessory powertrol heater. When lamp filament brightens inside well, allow mixture to cool until the two phases separate as indicated by obscuring of the lamp filament. Consists of thin film tube; 400ml pyrex™ beaker; cover assembly with bath stirrer, sample pump rotor and cooling coil; 6v lamp with line cord; and drive motor. Positive drive pulley system rotates sample and bath stirrers. Accessory powertrol heater has variable stepless control and a reference dial for repeatable control of heating rate. Porcelain refractory top plate shields 75ow heater and has a positioning well for the borosilicate bath. Low voltage receptacle in heater housing accepts line cord of 6v lamp.

 accessories will be supplied with equipment :-

1) outer jacket with cork -- 1 no (cat no hamco 5ac1)

2) tube with cork – 1 no (cat no hamco5ac2)

3) brass stirrer inner – 1 no (cat no hamco 5ac3)

spares required for 5 year trouble free operation :-

1) outer jacket with cork -- 2 no (cat no hamco 5ac1)

2) tube with cork – 2 no (cat no hamco5ac2)

3) brass stirrer inner – 2 no (cat no hamco 5ac3)

 

ordering information :-

Note: We also have a fully automatic, semi-automatic and manual model.

Product Details:

We are engaged in offering a wide range of   Petroleum Testing Equipment to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of Petroleum Oil Testing Equipment  to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of Petroleum Testing Lab Equipment  to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Digital Abel Flash Point Apparatus to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of  Flash Point Apparatus to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Low Temperature Kinematic Viscosity Baths to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Absolute And Kinematic Viscosity Bath to our clients. Our range of all products is widely appreciated by our clients

Product Details:

We are engaged in offering a wide range of   Pensky Marten Flash Fire Point Apparatus to our clients. Our range of all products is widely appreciated by our clients

Product Details:

AS Per IP-33 and IS-1448(p-20) Electrically Heated model with voltage Variance for control.

• Pen sky marten flash point tester closed cup as per IP-34,ASTM D 93 & IS 1448(P-21) Electrically heated model with motorized stirrer with digital temperature controller.
• Cleveland open cup flash & fire point apparatus as per IP 36, ASTM D 92,IS 1448 (P 69) Electrically heated model with voltage variance or Energy Regulator.

We also manufacture complete range of oil & petrol testing equipment like:

• Acidity By Extraction
• Bomb Calorimeter
• Carbon Residue Conrad son Or Rams bottom
• Cloud & Pour Point
• Copper Strip Corrosion ,Silver Strip Corrosion
• Dean & Stark Apparatus
• D emulsification
• Die electric Breakdown Voltage of Transformer Oils
• Distillation Appt. of petroleum products
• Existent Gum Bath
• Flow Cup with certificate and stand
• FIA Apparatus
• Oxidation Stability
• Reid Va pour Pressure Appt.
• Redwood Viscometer 1 & 2
• Sampling Bombs S.S
• Sediment By Extraction Appt.
• Smoke Point
• ASTM Thermometers
• Viscometer
• Drop Point & Softening Point Apparatus

Product Details:

TEST METHOD :- Foaming of lubricating oils in applications involving turbulence, high speed gearing or high volume pumping can cause inadequate lubrication, cavitation, overflow and premature oxidation. The sample is blown with a controlled volume of air at different specified temperatures, including a newer high temperature test at 150°C. The resultant foam is measured at the end of each aeration period and at different intervals afterward. In the high temperature test, the amount of time required for the foam to collapse to “0” after the aeration period is also measured.

STANDARD :- Conforms to the specifications of:ASTM D892, D6082; IP 146; DIN 51566; FTM 791-3211; NF T 60-129,Temperature Control:Digital Setpoint and Displays °C/°F switchable.
Features & Benefits :

1)      Type Of Bath :- Electrically Heated Immerssion Heater.

2)      Max Working Temperature :- 160 Degree C

3)      Continous Working Temperature :- 150 Degree C.

4)      Capacity :- 1 Sample At A Time(hamco22a),2 Sample(hamco22b), 3 Sample(hamco22c).

5)      Heater :- Immerssion Heater.

6)      Accuracy :- +/- 0.3 Degree C.

7)      Readability :- +/- 0.1 Degree C.

8)      Temperature Controller :-

a.       Temp. Is Controlled By Microprocessor Based Pid Temp. Controller ,

b.      It Is Having Dual Display With Lnt Or Siemens Contactor For Switching On & Switching Off The Heater.

9)      Input Power Supply : 230 V Ac, 50 Hz, 1 Phase With 10 Amp Current Rating.

10)  Heating Load : 3 Kw .

11)  Thermocouple :-

a.       Calibrated Rtd Type Thermocouple Will Be Provided Capable Of Measuring Upto 120 Deg C At Accuracy Of +/- 0.1 Deg C.

12) Control Panel/display :-

a.       Digital Display For Present , Set Temperatures .

b.      Heater Indicator.c.       Main Switch On/off Indicator.

13) Safety Interlocks/ Relay :-

a.       Overload Safety Cut-off.

b.      Safety For Input Power Fluctuation.

c.       1-phase Indication Lamp.d.      Emergency Switch Off.

14) Construction :-

a.       Double Walled Construction , Thermally Insulated With Cooling System For Better Performance During Continous Operation.

b.    Powder Coated External Surface For Esthatic Appearance.
Ordering Information :-

Product Details:

TEST METHOD :- The sample is evaporated and condensed under controlled conditions, and observations are made of the temperatures at which various percentages are recovered and/or the percentages recovered at specified temperatures.
STANDARD :- Conforms to the specifications of: ASTM D86, D285, D4737 and related international specifications

Features & Benefits :-
1) Type Of Heaing :- Electrically Heated Heater.2) Max Working Temperature :- 400 Degree C3) Continous Working Temperature :- 350 Degree C4) Capacity :- 1 Sample At A Time.5) Heater :- Ceramic Coil Heater6) Temperature Controller :-
A. Temp. Is Controlled By Energy Regulator.
7) Input Power Supply : 230 V Ac, 50 Hz, 1 Phase With 8 Amp Current Rating.
8) Heating Load : 1 Kw .
9) Flask Adjustment : By Manual Cam Mechanisam/ Rack & Pinion Arrangement.
10) Cooling Bath : Made Of Stainless Steel With Drain Cork.
11) Cooling Bath Stand : Ms Stand , Duly Powdercoated.
12) Distillation Flask : Made Of Corning Glass , Capacity 125ml .
13) Measuring Cylinder : Made Of Corning Glass With Graduation Done As Per Class A Certificate.
14) Side Arm Cork : Made Of Silicon To Withstand High Temperature.
15) Top Arm Cork : : Made Of Silicon To Withstand High Temperature And To Mount Thermometer.
Accessories Will Be Supplid With Equipment :-
1) Distillation Flask -- 1 No(cat No Hamco 17ac1)
2) Measuring Cylinder -- 1 No (cat No Hamco 17ac2)
3) Side Arm Cork -- 1 No (cat No Hamco 17ac3)
4) Top Arm Cork  1 No. (cat No Hamco 17ac4)
5) Thermometer Astm 7c -- 1 No. (cat No Astm 7c)
6) Thermometer Astm 8c  1 No. (cat No Astm 8c)
Dimension :- Ixwxh,in.(cm)
16x21.5x14.5 (41x55x37)
Net Weight: 64 Lbs (29kg)
Ordering Information :-

 

Product Details:

Test Method :- These viscometers are used to determine the viscosity of petroleum products. Two adoption of red wood viscometer are available no. 1 for liquids having red wood flow 20 seconds to 2000 seconds and no. 2 for liquids whose flow time exceeds 2000 seconds and no. 2 for liquids whose flow time exceeds 2000 seconds. Redwood viscometer is used for the determination of redwood viscosity and which can be converted to kinematic viscosity also. It is also used for observing the effect of temperature on viscosity by plotting graph.

Temperature Controller:-

a. By energy regulator which will turn on & off heater as time switch.

 

Stirrer : manual stirrer with stirrer blade for maintaining uniformity throughout chamber.

Top lid made of stainless steel with provision of mounting of one thermometer. .

Control Panel/Display:-

a. Energy Regulator .

b. Heater Indicator.

c. Kettle plug for heater connection.
Construction:-

a. Double walled construction, thermally insulated with inside body made of stainless steel outside gi.

b. Powder coated external surface for esthatic appearance.
accessories will be supplid with equipment :-

1) SS lid cover --1 no (cat no hamco 33ac1)

2) Thermometer collar -- 1 no (cat no hamco 33ac2)

3) Ball lock – 1 no. (cat no hamco 33ac3)

4) Glass redwood cup -- 1 no. (cat no hamco 33ac4)

5) Thermometer ip 8c with cal cert – 1 no. (cat no hamco33ac4)

6) Thermometer ip 9c with cal cert – 1 no. (cat no hamco33ac5)

7) Thermometer ip 10c with cal cert – 1 no. (cat no hamco33ac6)

8) Digital stopwatch – 1 no (cat no hamco33ac7)

spares required for 5 year trouble free operation :-

1) SS immersion heater -- 1 no. (cat no hamco33s1)

2) Glass redwood cup -- 1 no. (cat no hamco 33ac4)

3) Thermometer ip 8c with cal cert – 1 no. (cat no hamco33ac4)

4) Thermometer ip 9c with cal cert – 1 no. (cat no hamco33ac5)

5) Thermometer ip 10c with cal cert – 1 no. (cat no hamco33ac6)

6) Digital stopwatch – 1 no (cat no hamco33ac7)

 

Product Details:

We are among the leading suppliers and manufacturer of Cloud And Pour Point Apparatus

Product Details:

The Pensky-Martens Closed Cup (PMCC) flash point tester is a specialized instrument used to determine the flash point of flammable liquids. The flash point is the lowest temperature at which a liquid can vaporize to form an ignitable mixture in the air near its surface. This parameter is crucial for assessing the fire and explosion hazards associated with various substances, including fuels, solvents, chemicals, and petroleum products.

Key Features and Components of PMCC Flash Point Tester:

1. Closed Cup Design: The PMCC flash point tester features a closed cup design, meaning that the sample being tested is contained within a sealed chamber during the measurement process. This design minimizes the risk of vapor escape and provides a more accurate representation of the flash point under controlled conditions.

2. Heating System: The instrument is equipped with a heating system that allows for precise temperature control and uniform heating of the sample. The heating rate can be controlled to simulate specific conditions relevant to the application or regulatory requirements.

3. Ignition Source: A controlled ignition source, such as an electrically heated coil or a spark mechanism, is used to ignite the vapors above the sample when reaching the flash point temperature. The instrument's design ensures that the ignition source is safely contained within the closed cup chamber.

4. Temperature Sensors and Controls: PMCC flash point testers incorporate temperature sensors, typically thermocouples or RTDs (Resistance Temperature Detectors), to monitor the temperature of the sample accurately. Advanced control systems regulate the heating rate and provide precise temperature control during the test.

5. Safety Features: Safety is a paramount consideration in PMCC flash point testers. These instruments often feature safety interlocks, ventilation systems, and protective barriers to prevent accidents, minimize exposure to hazardous vapors, and ensure compliance with safety standards and regulations.

6. Digital Display and Interface: Modern PMCC flash point testers may include digital displays, touchscreen interfaces, or computer-based software for monitoring test parameters, setting test conditions, recording data, and generating reports. These features enhance user convenience, data accuracy, and process repeatability.

7. Sample Handling: The instrument allows for the precise measurement and handling of small volumes of liquid samples, typically ranging from a few milliliters to a few hundred milliliters, depending on the specific model and application requirements.

Applications of PMCC Flash Point Tester:

1. Safety Assessment: The PMCC flash point tester is widely used in industries such as petroleum refining, chemical processing, manufacturing, and transportation to assess the fire and explosion risks associated with flammable liquids.

2. Quality Control: By determining the flash point of various substances, companies can establish quality control measures, ensure compliance with regulatory standards, and optimize storage, handling, and transportation practices to minimize risks.

3. Research and Development: Scientists, researchers, and engineers use PMCC flash point testers in research and development activities to study the thermal properties, safety characteristics, and performance of new materials, formulations, or products.

4. Regulatory Compliance: Many countries have specific regulations and standards governing the handling, storage, and transportation of flammable liquids. PMCC flash point testers help companies comply with these regulations by providing accurate and reliable flash point measurements.

 

Product Details:

Pensky Martene Flash Point Apparatus of hamco brand

Product Details:

Test Method: - This test method covers measurement of the ability of petroleum oils or synthetic fluids to separate from water. A Cylindrical Bath is made up of Glass with cylinder holder assy. to holds Graduated Cylinder 6 Nos. firmly with the clamps. A provision is made to rotate manually the Cylinder Holder Assembly which permits to locate the cylinders exactly below the blade of the stirrer. All 6 samples can be checked one after the other. 
Standard: - ASTM D1401, D6074, D6158; ISO 6614;DIN 51599; FTM 791-3201; NF T 60-125
Features & Benefits:-

       ·         Stirring Range :-  1100 to 1600 RPM.

·         Accuracy         :-  +/-  25 RPM. 

·         Bath Temperature :- Ambient +5 deg C to 90 deg C. 

·         Control stability  :-  +/-  0.5 deg c. 

·         Capacity  :-  6X 100 ml graduated Cylinder 

·         Medium :- Water or white technical oil. 

·         Temperature controller :- Digital display PID controller type. 

·         Sensor  :- PT 100 

·         Heater :- Stainless steel 1500 watt. 

·         Timer  :-  99 Min 59 sec preset timer. 

·         Bath circulator :-  Motorised. 

·         Illumination :-  Rear Illumination.
Description :- Constant temperature bath with stirrers for water seperability test. Load the 100 ml test cylinder with 40ml sample, 40 ml water . Load the cylinder in bath at 54 +/- 1 deg c. Stirs sample-water mixtures at 1500rpm for 5 minutes  and record the volume of oil  and water after 5 minutes.
Accessories Will Be Supplied With Equipment:-
1)       Graduated 100 ml cylinder for water seperatability  (Model HAMCO 95AC1)  --  6 Nos.      2)       Rear Illumination --  1 Nos.
 Dimension: - Ixwxh,in, (cm)lxwxh, in.(cm): 20.75x15.25x29.5 (52.7x38.75x 74.9),Net Weight: 83 lbs (37.6 kg)

Shipping Information:-Shipping Weight: 188 lbs (85.3 kg),Dimensions: 34x27x40 in. (86.4x68.6x101.6 cm)
Ordering Information:-

 

 

Additional Information:

• Item Code: HAMCO95

Product Details:

TEST METHOD :- Smoke point is an indicator of the combustion qualities of aviation turbine fuels and kerosene. The fuel sample is burned in the Smoke Point Lamp, and the maximum flame height obtainable without smoking is measured.

STANDARD :- Conforms to: ASTM D1322; ISO 3014; IP 57; DIN 51406; FTM 791-2107; NF M 07-028.

FEATURES & BENEFITS :-

Burns fuel samples under controlled conditions for smoke point determinations of aviation turbine fuels and similar products. Consists of brass lamp body with chimney; gallery; 0-50mm black glass scale with white markings; brass plated door with curved glass window; candle socket; and plated brass candle with wick tube and air vent. Mounted on a cast iron base with aluminum support rod.

ACCESSORIES WILL BE SUPPLIED WITH EQUIPMENT :-

1) COTTON WEAK , NON – EXTRACTED -- 1 NO (CAT NO HAMCO43AC1)
2) CANDLE – 1 NO (CAT NO HAMCO43AC2)

SPARES REQUIRED FOR 5 YEAR TROUBLE FREE OPERATION :-

1) Cotton weak non extracted -- 6 NOS.(CAT NO HAMCO43AC1)
2) Candle -- 1 NO.(CAT NO HAMCO43AC2)
3) Front concave glass – 1 NO (CAT NO HAMCO43S1)

ELECTRICAL REQUIREMENT –

NO ELECTRICITY REQUIRED.

ORDERING INFORMATION :-

Catalogue no
Product description
Electrical requirement
Hamco 43
Smoke point apparatus
Hamco 43ac1
Cotton weak
Hamco 43ac2
Candle
Hamco 43s1
Front concave glass-

Product Details:

Copper Corrosion Test Apparatus 

• SS made,motor driven water bath stirrer  with pid temp. controller with facility to inset six bomb at one time.
• Copper Strip
• Inspection Tube
• Test Tube with holder
• ‘O’Ring
• Grit Paper
• SS Bomb
• Laminated chart for above

Product Details:

Test Method: -Determines a lubricant’s ability to prevent rusting of metal surfaces. Suitable for steam turbine oils, gear oils, hydraulic oils and other types of inhibited mineral oils. A steel test specimen is immersed in a heated mixture of sample oil and water which is stirred continuously during the test. After the test period the specimen is examined for rusting. The standard (ASTM D665) method uses a vertical specimen; the ‘horizontal disc method’ (ASTM D3603) uses both horizontal and vertical test surfaces.

Standard: - ASTM D665, D3603, D6158; NACE TM-01-72; IP 135; ISO 7120; DIN 51355, DIN 51585; FTM 791-4011, 791-5315; NF T 60-151

Features & Benefits:-1)      Accommodates Four sample beakers,2)      Microprocessor pid high accuracy temperature control,3)       Testing Capacity: Four (4) 400mL sample beakers,4)       Maximum Temperature: 95°C,5)       Temperature Control Stability: ±0.5°C (±1°F),6)       Drive Motor: 1⁄20hp induction motor,7)       Bath Medium:30 Ltr white technical oil or Water.
Description :- Constant temperature bath with stirrers for rust preventing characteristics tests. Stirs sample-water mixtures at 1000rpm and controls temperature with ± 0.5°C (± 1°F) stability. Immerses test beakers at the proper depth per ASTM specifications. Microprocessor PID control provides quick temperature stabilization without overshoot, and the bath is protected by an overtemperature control circuit that interrupts power should bath temperature exceed a programmed cut-off point. Dual LED displays provide actual and setpoint temperature values in °C/°F format. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Stainless steel stirrer paddles are driven by a ball bearing type motor through an improved pulley drive-roller bearing arrangement. Paddles can be raised and lowered for placement of sample beakers in the bath. Includes test specimens, holders and beaker covers for ASTM D665 or D3603 testing (see specifications and ordering information). Stainless steel bath includes perforated support shelf for beakers and two-position cover plate that adjusts for either ASTM D665 or D3603 testing. Long-lasting polyester drive belt improves reliability. Drive train components are protected by a removable steel guard. All exterior surfaces have stainless steel or chemical resistant polyurethane enamel finishes.
Accessories Will Be Supplied With Equipment:-1)       Steel Test Specimen (Model HAMCO 161AC1)  --  4 Nos.,2)       Glass Beaker (HAMCO161AC2)--  4 Nos.,3)       Plastic Beaker Cover (HAMCO161AC3)– 4 Nos.,4)       Chuck for Holding test specimen.(HAMCO161AC4)—1 No.
Electrical Requirement –·         220-240V, 50/60Hz, Single Phase, 10.0A,·         OR 115V, 50/60Hz, Single Phase,20.0A
Dimension: - Ixwxh,in, (cm):-32X14X27 (83x36x69),Net Weight: 98 lbs (44 kg)   Shipping Information:-Shipping Weight: 209 lbs (95 kg),Dimensions: 13 Cu. ft.

Product Details:

Reid vapour pressure test appt. consist of bath with digital temp. Controller, air chamber, gasoline chamber, bleeder valve, manometer & pressure guage.

Product Details:

we are among the leading suppliers and manufacturer of Ramsbottom Carbon Residue Apparatus