Pharmaceutical Equipments

Product Details:

The Purpose of stability testing is to provide evidence on the how the quality of drug substances or drug product varies with time under the influence of environmental factors such as temperature, humidity and light and to establish a re test period for the drug substance or product under recommended storage conditions. Hence stability chamber serves as an important Quality attribute of the product.

HAMCO Make GMP stability test chambers are especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term , intermediate and accelerated stability studies.
Humidity system : Non condensing type steam injection system with water level arrangement with insulation to save heat energy.

· Air circulation : Flange Motor with Impeller and blower.

· Interior Illumination for working Area.

 

· There will be two nos of blower from 450 Ltr Onwords.

DATA RECORD :-

· 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded)

· Multilevel Passwords.

· Data storage device has online and offline capabilities.

· Multi chamber data acquisition on single software.

· Tabular and graphical report, alarm deviation report.

· Mean Kinetic temperature report and alarm deviation report.

· Audit trial report.

· Attractive reports and graphs.

· Alarm report.

· Time synchronisation.

Additional Information:

• Item Code: HAMCO44
• Production Capacity: 500 PC/ANNUM
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOXES

Product Details:

“HAMCO” ‘HEATING AND COOLING CHAMBER WITH HUMIDITY CONTROL’ is designed primarily to meet the requirements for tests of thermal shock and various industrial applications. These chambers are designed to meet the testing challenge of vary industrial application.

HAMCO Make GMP ‘HEATING AND COOLING CHAMBER WITH HUMIDITY CONTROL’ is especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term, intermediate and accelerated stability studies.

 

Specifications:-

·         Temperature Range -40 °C to 250.0 °C, Humidity 40 to 95%RH, Accuracy +/- 0.5 °C. Uniformity +/- 2.0 °C

·         Temperature Range -20 °C to +175.0 °C, Humidity 40 to 95% RH, Accuracy +/- 0.5 °C. Uniformity +/- 2.0 °C

·         Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 deg C

·         Heating system: U shaped Nichrome wire heater in SS Sheathing.

·         Cooling system: Hermetically sealed CFC free Emerson compressor with R 23a refrigerant .Cascade system.

·         Air circulation: Flange Motor with Impeller and blower.

·         Interior Illumination for working Area.

·         There will be two nos of blower from 450 Ltr Onwards.

 

 

Construction:-

·         Double walled, gap between walls filled with PUF Insulation.

·         Standard Model: Stainless steel Mirror polished chamber and heavy gauge Powder- coated CRC exterior.

·         GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.

·         Double Door: Inner full Viewing door and outer door insulated with lock and key arrangement.

·         50mm Validation Port with silicone rubber seal to insert sensor for validation purpose.

·         3” Thick CFC Free Puff Insulation.

·         Stainless steel Trays. Adjustable Tray Height adjustment.

·         Unit Mounted on castor wheels with front lock arrangement.

 

Product Details:

The Purpose of Walk in stability testing is to provide evidence on the how the quality of drug substances or drug product varies with time under the influence of environmental factors such as temperature, humidity and light and to establish a re test period for the drug substance or product under recommended storage conditions. Hence stability chamber serves as an important Quality attribute of the product.HAMCO Make GMP Walk in stability test chambers are especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term , intermediate and accelerated stability studies.

 

Details:

· Heating system: U shaped Fin type Nichrome wire heater in SS Sheathing.

· Cooling system : Hermetically sealed CFC free Emerson compressor with R 134a refrigerant .

· System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room

· Non Condensing steam injection type humidity system with standby heater & auto switch overs.

· Stand by humidity system

· Air circulation : Flange Motor with Impeller and blower for Forced Air Circulation.

· Interior Illumination for working Area.

 

CONTROL PANEL :-

· HMI Touch screen controller of 4.3”/ 7” with data logging facility.

· Data logging of atleast 1000 data is possible.

· Real time Graph visualisation facility.

· Multiuser with password protection facility.

· High Speed Ethernet based communication.

· Audio/Visual alarm for deviation.

· All operations through a single 4.3”/7” colour Touch Screen.

Product Details:

With Condenser Walk in Stability Chambers of 1 chamber

Product Details:

“HAMCO” ‘ FREEZE THAW CYCLIC CHAMBER  is designed primarily to meet the requirements for tests of thermal shock and various industrial applications. These chambers are designed to meet the testing challenge of vary industrial application..

Specifications:-·         Temperature Range -20 °C to 60 °C,Mode of Operation :-·         User can program specific profile needed for  their application to enable rapid simulation conditions and the need to replicate freezing & thawing during product testing.

Ordering Information:-

Product Details:

 

Product Details:

HAMCO Make Pharma refrigerator is designed to meet the testing challenges of the competitive pharmaceutical research field. It serves as the perfect environment for refrigerated storage , conduction of shelf life studies and general incubation.

 U shaped nichrome wire heater in ss sheathing.

· Cooling : CFC free compressor utilising R 134a eco friendly refrigerant , with condenser , motor and relay .

· Air circulation : With flange motor and blower.

· Construction : Double walled with poly urathene ( PUF) insulation provided with outer full length glass viewing door with locking arrangement.

CONSTRUCTION :-

· Double walled , gap between walls filled with PUF Insulation.

· Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.

· GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.

· Stainless steel Trays. Adjustable Tray Height adjustment.

· Unit Mounted on castor wheels with front lock arrangement.

 

Product Details:

We are the manufacturer & Exporter of Photo stability Chamber in India for last two decades. Our items are conceptualized and designed to conduct various experiments on the germination of the seeds in different controlled environmental conditions. All the crucial environmental parameters such as temperature, humidity and illumination are precisely controlled in our seed germinator by means of advanced microprocessor based technology.