BOD Incubator

Product Details:

A cryoprecipitate water bath is a controlled-temperature bath used to thaw cryoprecipitate, a blood component, while maintaining a specific temperature to preserve its efficacy and prevent damage.

Product Details:

We are engaged in offering a wide range of   Walk In Cool Chamber to our clients. Our range of all products is widely appreciated by our clients

Product Details:

HAMCO Make Pharma refrigerator is designed to meet the testing challenges of the competitive pharmaceutical research field. It serves as the perfect environment for refrigerated storage , conduction of shelf life studies and general incubation.SPECIFICATIONS :- Temp. controller : Microprocessor based PID control with auto tune facility. Temperature sensor : RTD Pt 100. Temperature display : Digital LED 3 ½ digit. U shaped nichrome wire heater in ss sheathing. Cooling : CFC free compressor utilising R 134a eco friendly refrigerant , with condenser , motor and relay . Air circulation : With flange motor and blower. Feet : Castor wheels. Trays : SS wire mesh , Heavy duty. Construction : Double walled with poly urathene ( PUF) insulation provided with outer full length glass viewing door with locking arrangement.CONSTRUCTION :- Double walled , gap between walls filled with PUF Insulation. Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel. 3” Thick CFC Free Puff Insulation. Stainless steel Trays. Adjustable Tray Height adjustment. Unit Mounted on castor wheels with front lock arrangement.
Microprocessor based PID temp. controller with auto tune facility for precise control of temperature Temp. Sensor : PT- 100 Recorder data bank to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional) PC Interface communication card with RS 485 for temperature and humidity control system ( Hardware only) ( optional)SAFETY FEATURES :- Over heat temperature cut off . Electrical overload compressor cutoff. Time delay for compressor switch on. Electrical short circuit breaker.UTILITIES (pre installation requisite):- Room temperature around machine preferably at 25 degree C. Stabilised input voltage of 230V Ac, 50 Hz, 20 Amps. Water drain line with ½” Nozzle to be provided at floor level.
DATA RECORD :- 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded) Multilevel Passwords. Data storage device has online and offline capabilities. Multi chamber data acquisition on single software. Tabular and graphical report, alarm deviation report. Mean Kinetic temperature report and alarm deviation report. Audit trial report. Attractive reports and graphs. Alarm report. Time synchronisation.

Product Details:

Introduction : "HAMCO" make Laboratory Incubators are designed & fabricated to suit various I.S. & A.S.T.M. standards application in the growing field of Medical, Agricultural, Industrial, Research Laboratories & Hospitals. Features : a) Temperature 50C above ambient to 600C b) Time proportionate digital temperature controller with an accuracy of + / - 0.50CSpecification :RangeAmbient + 50C to 600CAccuracy+ / - 0.50CUniformity+ / - 1% of set valueHeat Up Time30 min. up to 600C without load.ControllerDigital Display Electronic Controller.SensorPt-100Internal ChamberMild Steel / Stainless Steel 304 quality.ExternalMild Steel Powder CoatedShelvesG.I. / Stainless Steel WiremeshInsulationGlass Wool 65 mm.VentilatorAdjustable type ( Aluminum)Door GasketHigh Temp. Felt / Asbestos GasketDoorsDouble Door, outer metallic & inner acralic doorOptionalSafety DeviceThermostat or Blind ControllerTimerON / OFF cycle.PID ControlMicroprocessor based PID ControllerAir CirculationForced air circulationElectric requirements AC 230 V & 50 Hz cycle.

Additional Information:

• Item Code: HAMCO41
• Delivery Time: READY STOCK

Product Details:

“HAMCO” BOD Incubators are designed primarily to meet the requirements for tests of Biological Oxygen Demand / Biochemical oxygen demand and equipped for controlled incubation and storage of sensitive samples / cultures, vaccines etc. . These incubators are designed to meet the testing challenge of pharmaceutical competitive research field and enhance the scientific efforts of educational institute and organisation.HAMCO Make GMP BOD Incubator is especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term, intermediate and accelerated stability studies.SPECIFICATIONS :- • Temperature Range 5.0 °C to 60.0 °C. Accuracy +/- 0.1 °C. Uniformity +/- 1.0 °C• Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 deg C• Heating system: U shaped Nichrome wire heater in SS Sheathing.• Cooling system: Hermetically sealed CFC free Emerson compressor with R 134a refrigerant .• Air circulation: Flange Motor with Impeller and blower.• Interior Illumination for working Area.• There will be two nos of blower from 450 Ltr Onwards.Construction:-• Double walled, gap between walls filled with PUF Insulation.• Standard Model: Stainless steel Mirror polished chamber and heavy gauge Powder- coated CRC exterior.• GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.• Double door: Inner full Viewing door and outer door insulated with lock and key arrangement.• 50mm Validation Port with silicone rubber seal to insert sensor for validation purpose.• 3” Thick CFC Free Puff Insulation.• Stainless steel Trays. Adjustable Tray Height adjustment.• Unit Mounted on castor wheels with front lock arrangement.Control Panel:-• Microprocessor based PID temp. Controller with auto tune facility for precise control of temperature.• Temp. Sensor: PT- 100.• Dedicated safety controller with separate sensor to cut off the supply in case of overshoot and undershoot of temperature giving audio visual alarm. ( Optional)• Recorder data bank to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional)• Alarm: Audio visual alarm if temperature deviates from the present temperature.• PC Interface communication card with RS 485 for temperature and humidity control system ( Hardware only) ( optional)Safety Features:-• Over heat temperature with alarm.• Electrical overload compressor cut-off.• Time delay for compressor switch on.• Electrical short circuit breaker.UTILITIES (Pre Installation Requisite):-• Room temperature around machine preferably at 25 degree C.• Stabilised input voltage of 230V Ac, 50 Hz, and 20 Amps.• Water drains line with ½” Nozzle to be provided at floor level.Data Record:-• 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded)• Multilevel Passwords.• Data storage device has online and offline capabilities.• Multi chamber data acquisition on single software.• Tabular and graphical report, alarm deviation report.• Mean Kinetic temperature report and alarm deviation report.• Audit trial report.• Attractive reports and graphs.

Product Details:

“HAMCO” BOD Incubators are designed primarily to meet the requirements for tests of Biological Oxygen Demand / Biochemical oxygen demand and equipped for controlled incubation and storage of sensitive samples / cultures, vaccines etc. . These incubators are designed to meet the testing challenge of pharmaceutical competitive research field and enhance the scientific efforts of educational institute and organisation.HAMCO Make GMP BOD Incubator is especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term, intermediate and accelerated stability studies.SPECIFICATIONS :- • Temperature Range 5.0 °C to 60.0 °C. Accuracy +/- 0.1 °C. Uniformity +/- 1.0 °C• Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 deg C• Heating system: U shaped Nichrome wire heater in SS Sheathing.• Cooling system: Hermetically sealed CFC free Emerson compressor with R 134a refrigerant .• Air circulation: Flange Motor with Impeller and blower.• Interior Illumination for working Area.• There will be two nos of blower from 450 Ltr Onwards.Construction:-• Double walled, gap between walls filled with PUF Insulation.• Standard Model: Stainless steel Mirror polished chamber and heavy gauge Powder- coated CRC exterior.• GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.• Double door: Inner full Viewing door and outer door insulated with lock and key arrangement.• 50mm Validation Port with silicone rubber seal to insert sensor for validation purpose.• 3” Thick CFC Free Puff Insulation.• Stainless steel Trays. Adjustable Tray Height adjustment.• Unit Mounted on castor wheels with front lock arrangement.Control Panel:-• Microprocessor based PID temp. Controller with auto tune facility for precise control of temperature.• Temp. Sensor: PT- 100.• Dedicated safety controller with separate sensor to cut off the supply in case of overshoot and undershoot of temperature giving audio visual alarm. ( Optional)• Recorder data bank to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional)• Alarm: Audio visual alarm if temperature deviates from the present temperature.• PC Interface communication card with RS 485 for temperature and humidity control system ( Hardware only) ( optional)Safety Features:-• Over heat temperature with alarm.• Electrical overload compressor cut-off.• Time delay for compressor switch on.• Electrical short circuit breaker.UTILITIES (Pre Installation Requisite):-• Room temperature around machine preferably at 25 degree C.• Stabilised input voltage of 230V Ac, 50 Hz, and 20 Amps.• Water drains line with ½” Nozzle to be provided at floor level.Data Record:-• 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded)• Multilevel Passwords.• Data storage device has online and offline capabilities.• Multi chamber data acquisition on single software.• Tabular and graphical report, alarm deviation report.• Mean Kinetic temperature report and alarm deviation report.• Audit trial report.• Attractive reports and graphs.

Product Details:

“HAMCO” BOD Incubators are designed primarily to meet the requirements for tests of Biological Oxygen Demand / Biochemical oxygen demand and equipped for controlled incubation and storage of sensitive samples / cultures, vaccines etc. . These incubators are designed to meet the testing challenge of pharmaceutical competitive research field and enhance the scientific efforts of educational institute and organisation.HAMCO Make GMP BOD Incubator is especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term, intermediate and accelerated stability studies.SPECIFICATIONS :- • Temperature Range 5.0 °C to 60.0 °C. Accuracy +/- 0.1 °C. Uniformity +/- 1.0 °C• Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 deg C• Heating system: U shaped Nichrome wire heater in SS Sheathing.• Cooling system: Hermetically sealed CFC free Emerson compressor with R 134a refrigerant .• Air circulation: Flange Motor with Impeller and blower.• Interior Illumination for working Area.• There will be two nos of blower from 450 Ltr Onwards.Construction:-• Double walled, gap between walls filled with PUF Insulation.• Standard Model: Stainless steel Mirror polished chamber and heavy gauge Powder- coated CRC exterior.• GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.• Double door: Inner full Viewing door and outer door insulated with lock and key arrangement.• 50mm Validation Port with silicone rubber seal to insert sensor for validation purpose.• 3” Thick CFC Free Puff Insulation.• Stainless steel Trays. Adjustable Tray Height adjustment.• Unit Mounted on castor wheels with front lock arrangement.Control Panel:-• Microprocessor based PID temp. Controller with auto tune facility for precise control of temperature.• Temp. Sensor: PT- 100.• Dedicated safety controller with separate sensor to cut off the supply in case of overshoot and undershoot of temperature giving audio visual alarm. ( Optional)• Recorder data bank to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional)• Alarm: Audio visual alarm if temperature deviates from the present temperature.• PC Interface communication card with RS 485 for temperature and humidity control system ( Hardware only) ( optional)Safety Features:-• Over heat temperature with alarm.• Electrical overload compressor cut-off.• Time delay for compressor switch on.• Electrical short circuit breaker.UTILITIES (Pre Installation Requisite):-• Room temperature around machine preferably at 25 degree C.• Stabilised input voltage of 230V Ac, 50 Hz, and 20 Amps.• Water drains line with ½” Nozzle to be provided at floor level.Data Record:-• 21 CFR Part 11 compliant software with audit trial ( who did what and when is recorded)• Multilevel Passwords.• Data storage device has online and offline capabilities.• Multi chamber data acquisition on single software.• Tabular and graphical report, alarm deviation report.• Mean Kinetic temperature report and alarm deviation report.• Audit trial report.• Attractive reports and graphs.