Pharmaceutical Testing Instrument

Product Details:

TEST METHOD :- With individual lifting and tilting arrangement Is designed to carry out simultaneously three tests of dissolution rate of tablets and capsules as per USP standard. These tests are carried out by quality control and R & D Departments in pharmaceutical industry. It consists of constant temperature water bath made of transparent acrylic . Temp. is controlled by fully solid state controller within +/- 0.5 deg C.

LIST OF COMPONENT :-

It consists of constant temperature water bath made of transparent acrylic . Temp. is controlled by fully solid state controller within +/- 0.5 deg C. The round bottom glass jars are placed equidistant inside the motors. The motors are electronically controlled to speed precisely within +/- 1 RPM. The RPM is controlled digitally and is indicated on a digital display. Motor assembly can be lifted with auto lifting mechanism for easy operation. It is a microprocessor based digital pre-set timer with audio alarm. The basket assemblies and stirring paddles are made from 316 grade stainless steel. Whole assembly can be tilted for easy change over of paddle and basket. It also helps to remove sample as well round bottom glass jar.

ELECTRICAL REQUIREMENT –

· 220-240V, 50/60Hz, Single Phase, 5.0A

· OR 115V, 50/60Hz, Single Phase, 10.0A

SHIPPING INFORMATION :- 

Shipping Weight: 44 lbs (20kg)
Dimensions: 7.0 Cu. ft.

ORDERING INFORMATION:-

Additional Information:

Item Code: HAMCO111C

Product Details:

HAMCO Digital Friability test apparatus is microprocessor based instrument designed to monitor the resistance of tablets to stresses and to decide their suitability for the further processes. These tests are carried out by quality control and R & D Department in pharmaceutical industry. A fix 25 RPM Motor drives the unique Universal acrylic drum( same drum can be used at left or right side of the instrument). Digital microprocessor based counter is provided to pre-set the revolution & to automatically stop the motor with alarm. These features eliminate the tedious calculation of timer mode. In Power failure , the memory of the microprocessor remember the tife left and complete the cycle after power resumes. Easy loading and unloading of the drum with positive grip is provided. Unloading of the drum after every test is required to remove the traces of loose dust on the drum for accurate calculation of friability.

Additional Information:

Item Code: HAMCO119

Product Details:

HAMCO DIGITAL BULK DENSITY APPARATUS is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceuticals & chemical powders and gives accurate & repeatability of the result. Bulk density is an essential test required in the process of tablet manufacturing, Capsules filling and cosmetics manufacturing as important part of quality programl. 4 digit microprocessor based pre set counter provided to set exact number of strokes. This features eliminate the tedious calculation of timer mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure non volatile memory of the microprocessor remember the last mode of operation, and complete the test after power resumed.

Additional Information:

Item Code: HAMCO124A

Product Details:

HAMCO DIGITAL TAP DENSITY APPARATUS is a microprocessor based instrument designed as per USP Standard for testing of powders , granules, pellets & other substances. It can hold cylinder of 100ml or 250ml capacity. 4 digit microprocessor based pre-set counter provided to set exact no of taps. Both the cylinder holder drops smoothly from the required height & simultaneously rotating & tapping motion ensures uniform & even packing down of samples. At the end of the test tapped density / compressibility index and housner ratio can be calculated easily from the weight and the tapped volume on the graduated cylinder. In power failure non volatile memory of the microprocessor remember the last mode of operation, and complete the test after power resumed.

Additional Information:

Item Code: HAMCO124B

Product Details:

HAMCO Make Pharma refrigerator is designed to meet the testing challenges of the competitive pharmaceutical research field. It serves as the perfect environment for refrigerated storage , conduction of shelf life studies and general incubation.

 U shaped nichrome wire heater in ss sheathing.

· Cooling : CFC free compressor utilising R 134a eco friendly refrigerant , with condenser , motor and relay .

· Air circulation : With flange motor and blower.

· Construction : Double walled with poly urathene ( PUF) insulation provided with outer full length glass viewing door with locking arrangement.

CONSTRUCTION :-

· Double walled , gap between walls filled with PUF Insulation.

· Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.

· GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.

· Stainless steel Trays. Adjustable Tray Height adjustment.

· Unit Mounted on castor wheels with front lock arrangement.

Additional Information:

Item Code: HAMCO45

Pay Mode Terms: T/T (Bank Transfer)

Product Details:

“HAMCO” ‘ FREEZE THAW CYCLIC CHAMBER  is designed primarily to meet the requirements for tests of thermal shock and various industrial applications. These chambers are designed to meet the testing challenge of vary industrial application..

Specifications:-·         Temperature Range -20 °C to 60 °C,Mode of Operation :-·         User can program specific profile needed for  their application to enable rapid simulation conditions and the need to replicate freezing & thawing during product testing.

Ordering Information:-

Additional Information:

Item Code: HAMCO39

Pay Mode Terms: T/T (Bank Transfer)

Port of Dispatch: JNPT

Production Capacity: 10

Delivery Time: 3 TO 4 WEEKS

Packaging Details: WOODEN BOX

Product Details:

Six Test Dissolution Rate Test Apparatus

TEST METHOD:- Is designed to carry out simultaneously six tests of dissolution rate of tablets and capsules as per USP standard. These tests are carried out by quality control and R & D Departments in the pharmaceutical industry. It consists of constant temperature water bath made of transparent acrylic. Temp. is controlled by a fully solid-state controller within +/- 0.5 deg C.

LIST OF COMPONENT:-

It consists of constant temperature water bath made of transparent acrylic. Temp. is controlled by a fully solid-state controller within +/- 0.5 deg C. The round bottom glass jars are placed equidistant inside the motors. The motors are electronically controlled to speed precisely within +/- 1 RPM. The RPM is controlled digitally and is indicated on a digital display. Motor assembly can be lifted with an auto lifting mechanism for easy operation. It is a microprocessor based digital pre-set timer with audio alarm. The basket assemblies and stirring paddles are made of 316-grade stainless steel.

STANDARD:-

FEATURES & BENEFITS:-

1) SPEED:- Variable from 25 to 160 with the accuracy of +/- 1 RPM.

2) TEMPERATURE:- 5 Degree above ambient to 45 deg C. Accuracy +/- 0.5 deg C.

3) TIMER:- Microprocessor based preset timer 00:01 to 99:59 Hrs with alarm.

4) BATH:- Made up of 10mm thick clear acrylic 595mm W X 340mm D X 210mm H

5) HEATER:- 1000 watt stainless steel.

6) SENSOR:- PT-100 Sensor.

7) DIMENSION :- 620mm W X 520mm D X 660mm H

8) TEMPERATURE CONTROLLER:-

a. Digital Microprocessor Based.

9) INPUT POWER SUPPLY: 230 V AC, 50 HZ, 1 PHASE WITH 6 AMP CURRENT RATING.

10) HEATING LOAD: 1 KW.

ELECTRICAL REQUIREMENT –

· 220-240V, 50/60Hz, Single Phase, 6.0A

· OR 115V, 50/60Hz, Single Phase, 12.0A

DIMENSION :- Ixwxh,in.(cm)
62 X 52 X 66

SHIPPING INFORMATION :-

Shipping Weight: 127.6 lbs (58kg)
Dimensions: 9.0 Cu. ft.

ORDERING INFORMATION:-

Additional Information:

Item Code: HAMCO111A

Product Details:

TEST METHOD :- Is designed to carry out simultaneously six tests of dissolution rate of tablets and capsules as per USP standard. These tests are carried out by quality control and R & D Departments in pharmaceutical industry. It consists of constant temperature water bath made of transparent acrylic . Temp. is controlled by fully solid state controller within +/- 0.5 deg C.

LIST OF COMPONENT :-

It consists of constant temperature water bath made of transparent acrylic . Temp. is controlled by fully solid state controller within +/- 0.5 deg C. The round bottom glass jars are placed equidistant inside the motors. The motors are electronically controlled to speed precisely within +/- 1 RPM. The RPM is controlled digitally and is indicated on a digital display. Motor assembly can be lifted with auto lifting mechanism for easy operation. It is a microprocessor based digital pre-set timer with audio alarm. The basket assemblies and stirring paddles are made from 

FEATURES & BENEFITS:-

1) SPEED :- Variable from 25 to 160 with accuracy of +/- 1 RPM.

2) TEMPERATURE :- 5 Degree above ambient to 45 deg C. Accuracy +/- 0.5 deg C.

3) TIMER :- Microprocessor based preset timer 00:01 to 99:59 Hrs with alarm.

4) BATH :- Made up of 10mm thick clear acrylic 300mm W X 200mm D X 200mm H

5) HEATER :- 350 watt stainless steel.

6) SENSOR :- PT-100 Sensor.

7) DIMENSION :- 300mm W X 220mm D X 780mm H

8) TEMPERATURE CONTROLLER :-

a. Digital Microprocessor Based.

9) INPUT POWER SUPPLY : 230 V AC, 50 HZ, 1 PHASE WITH 6 AMP CURRENT RATING.

10) HEATING LOAD : 1 KW .

ELECTRICAL REQUIREMENT –

· 220-240V, 50/60Hz, Single Phase, 3.0A

· OR 115V, 50/60Hz, Single Phase, 6.0A

ORDERING INFORMATION:-

Additional Information:

Item Code: HAMCO111B

Product Details:

Detail: Leak Test Apparatus :

1) Power supply: 230Vac -10%,50hz -5% single phase.

2) Vacuum Stabilisation : Fast Vacuum stabilization within 30 secs for 400 mm of Hg /- 5 mm of Hg

3) Vacuum Release : Automatic Release of Vacuum pressure after completion of cycle.

4) Display : Graphical LCD display of 128 x 64(Much bigger and better than 20 x 4 )

5) Keys : Imported soft touch membrane Key

6) Printer - Inbuilt Thermal printer . Not need of any external printer.

7) Timer : Programmable vacuum and Hold Time and Retention time upto 9999 sec.

Accessories will be supplid with equipment :-

1) Main Apparatus -- 1 no (cat no hamco155Aac1)
2) Vacuum Dessicator of 8/10/12 inches (cat no hamco155ac2/8, hamco155ac2/10, hamco155ac2/12 )

3) Tubing 1 mtr Length (cat no hamco155ac3)